ECKELMANN UA 410 D, Operating Instruction

Page: 106 / 142

Menu structure UA 410 D Contr. type UA 111 XP
98
Firmware V1.40 - Doku 2.1 06. April 2016
S
Menu 2-1-3 Zone 1A Altern.
Shown only when setpoint toggle is enabled (Menu 3-3).
COOLING 1A POS: XXXXX
Entry Default
Setpoint R2.x XXX °C
Supply air temperature setpoint -10..20 -1 °C
Hystersis R2.x X K
Supply air temperature hysteresis setpoint 1..8 2 K
Antifreeze XXX °C
Antifreeze protection temperature limit -20..30 -4 °C
Hystersis anti XXX K
Antifreeze protection hysteresis 1..8 2K
S
Menu 2-1-4 Zone 2A Altern.
Shown only when two-zone operation is set (Menu 6-1) and setpoint toggle is not disabled (Menu 3-3)
COOLING 2A POS: XXXXX
Entry Default
Setpoint R2.8 XXX °C
Supply air temperature setpoint -10..20 -1 °C
Hystersis R2.8 X K
Supply air temperature hysteresis setpoint 1..8 2 K
S
Menu 2-2 Defrost
DEFROST POS: XXXXX
1 Zone 1
Move to menu 2-2-1
2 Zone 2
Move to menu 2-2-2; shown only when two-zone operation is set (Menu 6-1)
3 Zone 1A Altern.
Move to menu 2-2-3; shown only when setpoint toggle is enabled (Menu 3-3)
4 Zone 2A Altern.
Move to menu 2-2-4; shown only when two-zone operation is set (Menu 6-1) and only when
setpoint toggle is enabled (Menu 3-3)
S
Menu 2-2-1 Zone 1
DEFROST 1 POS: XXXXX
Entry Default
Def. End. Tmp. XX °C
Defrost termination temperature setpoint --, 5..20 8 °C
S
Menu 2-2-2 Zone 2
DEFROST 2 POS: XXXXX
Entry Default
Def. End. Tmp. XX °C
Defrost termination temperature setpoint --, 5..20 5 °C
S
Menu 2-2-3 Zone 1A Altern.
DEFROST 1A POS: XXXXX
Entry Default
Def. End. Tmp. XX °C
Defrost termination temperature setpoint --, 5..20 8 °C