ECKELMANN UA 410 D, Operating Instruction

Page: 77 / 142

Operation of UA 410 D
69 Firmware V1.40 - Doku 2.1 06. April 2016
7.3 Remote control via a terminal
Further details for the operation of a system centre, store computer or operator terminal can be
found in their operating manuals.
For the remote control of a controller, it makes no difference whether this is done with a system centre (A), a
store computer or with an operator terminal (B) as the user interfaces on the terminals are almost identical and
the same functions are available. See chapter 7.3.2 for details about remote control.
The system centre only emulates the "hardware front" of its "store computer" predecessor or of the operator ter­
minal by software on its touchscreen which is demonstrated by the following comparison between the terminals
of the CI 4x00 and CI 3x00 / AL 300:
MODE ESC
PRIO 1
PRIO 2
,
9
WXYZ
7
PQRS
8
TUV
6
MNO
4
GHI
5
JKL
3
DEF
2
ABC
1
0
ALARM
RESET
(1)
( ) 8
( ) 10 ( ) 9
( ) 7 ( ) 3 ( ) 6
ZNR.
21003 DE
F
01
CI 4000
TOUCH
( ) 4
( ) 2
( ) 5
A
B
( ) 1 ( ) 2
( ) 8 ( ) 7 ( ) 5 ( ) 6 ( ) 4 ( ) 3
(1) CI 4x00: "Alarms and messages" button in the main menu for display of whether alarms are
pending.
Alarms are acknowledged in the "alarm list".
CI 3x00 / AL 300: Red LED signal lamps to indicate whether alarms are pending.
(2) CI 4x00: "Horn" button in the main menu for muting of the buzzer and
for reset of the AUX relay.
CI 3x00 / AL 300: Button for muting of the buzzer,
for reset of the AUX relay* and for acknowledgement of alarms.
(3) Display (4 lines x 20 characters) for display of the menu of the controller.
(4) ESC button
(5) Cursor buttons
(6) MODE button for, e.g. toggle upper case / lower case for text input.
(7) Alphanumeric keypad
(8) ENTER button (
↵
)
Only CI 3x00 / AL 300:
(9) On/Off button for, e.g. lighting
(10) Green LED signal lamp for status indicator whether the button is activated (then green) or deactivated.