ECKELMANN UA 410 D, Operating Instruction

Page: 16 / 142

System Design of UA 410 D
8 Firmware V1.40 - Doku 2.1 06. April 2016
2.2 Hardware
The case controller is housed in a plastic casing for DIN rail mounting and does not require any further optional
expansion modules. Up to 99 case controllers can be used within the E*LDS system. As required, a BT 300 x
Operator Interface and up to 4 BT 30 Temperature Displays can be connected. For a firmware update, the con­
troller can be connected to a laptop or PC via the USB interface. The application range of the temperature
recording controller is described in more detail in chapter 3.2.
The following diagram illustrates the system architecture of the UA 410 D AC case controller (complete):
CAN bus
Digital outputs: 4 x normal open contact 3 x two-way-contacts 2 x 24 V DC / 50 mA
4 x
Analog inputs:
230 V
A
C
(1x)
BT 300
ESC
RESET
BT 30
(0..4x)
Case Controllers
(1..99)
Digital inputs: 2 x 4..20 mA 2-wire-NTC- temperature sensors
2 x
Analog outputs:
0..10 V
USB
ZNR. 1
15 130 E1
MODE ESC
PRIO 1
PRIO 2
,
0
ALARM
RESET
V4.24
AL 300
CI 3000
CI 3100
CI 4x00
Ports:
CAN bus: Communication in E*LDS-System, new version
DISPLAY: Connection for BT 300x Operator Interface
USB: For conducting a firmware update
Inputs/outputs
4 digital inputs 230 V AC, floating
10 analog inputs Connection for two-wire NTC temperature sensors
2 x analogue inputs 4..20 mA - currently without function
Outputs
3 relay output 230 V AC / 6 A (changeover)
4 relay outputs 230 V AC / 6 A (N.O.)
2 transistor outputs 24 V DC / 50 mA
2 x analogue outputs 0..10 V DC - currently without function
Real-time clock
Battery-backed, lithium cell
For precise details of the UA 410 D AC see chapter 3.1. The connection and terminal configurations
are described in the chapter Connection and Terminal Configuration.