ECKELMANN UA 410 D, Operating Instruction

Page: 97 / 142

Menu structure UA 410 D Contr. type UA 111 X
89
Firmware V1.40 - Doku 2.1 06. April 2016
8.1.7 Menu 6 Configuration
CONFIGURAT POS: XXXXX
1 Refriger. Point
Move to menu 6-1
2 Controller
Move to menu 6-2
3 Cooling
Move to menu 6-3
4 Language
Move to menu 6-4
S
Menu 6-1 Refrger. Point
REFR. PT. POS: XXXXX
Entry Default
Refrger. Point Name:
Text only
xxxxxxxxxxxxxxx
Free text entry describing refrigeration point (see note follo­
wing table) Case/coldrm.
controller
Item ID: XXXXX
Free text entry displayed in screens after ITEM ID (see
note following table) UA400
Priority: XX
Alarm priority in failure of refrigeration point or when global
controller priority is set (Menu 6-5)
↑
,
↓
,
or numbers
(0..99)
1
Refr. Sys. No.: XX
No. of pack controller allocated to case/coldroom controller
↑
,
↓
,
or numbers
(--, 1..9)
1
Refr. Sys. Type: XXX
Associated compressor pack.
Parameter only required when linked to a VS 3000 BS
having several zones. If a different type of pack controller
is used, set this parameter blank (---)
↑
,
↓
,
or numbers
(---, Z1, Z2)
---
No. Sensors XX
Number of temperature sensors connected. After entering
↵
sensor scan is performed to redetermine the number of
sensors.
↵
Temp. Zones X
Number of temperature zones:
Single-zone operation/
Two-zone operation
↑
,
↓
,
or numbers
(1, 2)
2
A meaningful name that describes the refrigeration point in more detail should be entered, e.g.
Cheese Counter 2 and CC2. The name is entered in the screens of the Store Computer or Operator
Terminal. Direct entry cannot be made in the UA 410 D screens displayed on operator terminals.
The name also cannot be entered with the BT 300 x Operator Interface.
S
Menu 6-2 Controller
CONTROLLER POS: XXXXX
1 Type and Version
Move to menu 6-2-1
2 Temp. Display
Move to menu 6-2-2
3 Alarm Delay
Move to menu 6-2-3
4 230V Inputs
Move to menu 6-2-4
5 Sensor Type
Move to menu 6-2-5