PXG 900 User's Guide - Firmware Version 4.3 - 1/9/2017
66
6.
7. You should see an alert box stating that the import was successful. Click OK.
You can now access the gateway using the HTTPS protocol (for example,
).
https://192.168.1.1/
Ports in Use
For web-based communications with the gateway, TCP Ports 80 (HTTP) and 443 (HTTPS) are enabled by default.
For special situations, you may elect to disable one or the other. However, disabling both prevents any web access
to the gateway and is not recommended. You may also choose to change the assigned port number for either.
The following ports and protocols are disabled by default. You must elect to enable them and may choose to change
the assigned port number.
Port Number
Protocol/Use
TCP/UDP
502
Modbus TCP
TCP
5150
EMINT Mode - INCOM
UDP
26501
Modbus (COM1 Pass-thru)
TCP
26502
Modbus (COM2 Pass-thru)
TCP
26503
Modbus (Ethernet Pass-thru)
TCP
Summary of Contents for PXG 900
