Eaton Power Xpert 9395P 250 kVA, User And Installation Manual

Page: 50 / 170

41 9395P 250 kVA / 275 kVA / 300 kVA
User’s and Installation Guide
Terminal TB1 Name Description
1 REPO NC
I nput: Normally‐closed dry contact used to activate UPS EPO from a remote switch.
2 REPO Return
3 REPO NO
I
nput: Normally‐open dry contact used to activate UPS EPO from a remote switch.
4 REPO Return
5 Battery Aux
Input: Normally‐open contact used to indicate when UPS battery breaker is open or closed.
6 Battery Aux Common
7 48 Vdc Battery Shunt Trip +
Output: Contacts used to open battery breaker or disconnect.
8 48 Vdc Battery Shunt Trip –
9 Output Contactor K3 NC Aux
Output: Normally‐closed contact opens when output contactor closes.
10
Output Contactor K3 NC Aux
Common
Terminal TB2 Name Description
1 Pull Chain
Output: Backup control for parallel operation.
2 Pull Chain Common
3 Alarm Relay NC
Output: General purpose normally-closed (NC) relay contact.
4 Alarm Relay Common
5 Alarm Relay NO
Output: General purpose normally-open (NO) relay contact.
6 Alarm Relay Common
7 Not Used
8 Not Used
9 Not Used
10 Not Used
Terminal TB3 Name Descriptio n
1 Building Alarm 1
Input: Programmable UPS alarm, activated by a remote dry contact closure.
2 Building Alarm 1 Return
3 Building Alarm 2
Input: Programmable UPS alarm, activated by a remote dry contact closure.
4 Building Alarm 2 Return
5
Building Alarm 3
Default: Charger Off Input: Programmable UPS alarm, activated by a remote dry contact closure.
Default function set for charger off.
6 Building Alarm 3 Return
7
Building Alarm 4
Default: On Generator
Input: Programmable UPS alarm, activated by a remote dry contact closure.
Default function set for on generator.
8 Building Alarm 4 Return
9
Building Alarm 5
Default: Maintenance Bypass
10
Building Alarm 5 Return
NOTE
“Return“ indicates connection to electronics circuit ground. “Common” indicates connection to common side of isolated relay
contact.
Table 4‐1. TB1, TB2, and TB3 Interface Connections
Input: Programmable UPS alarm, activated by a remote dry contact closure.
Default function set for maintenance bypass.