Copyright © 2019 Eaton Corporation. All Rights Reserved.
IPN March 2019
11
DC System and Component Safety
Safety Warnings
Save these instructions – this manual contains important safety information for the transporting, unpacking,
installation and operation of all Eaton’s DC System products.
Important
If you are not able to understand the full manual provided with the dc system, please contact your Eaton
representative before commencing any handling, installation or operation activities. Contact details can be
found in the Worldwide Support section.
Audience
This guide is intended for use by:
Installers competent in:
•
installing and commissioning dc power systems
•
safe working practices for ac and dc powered equipment
•
the relevant local electrical safety regulations and wiring standards
Operators and maintenance staff competent in:
•
operation of dc power systems
•
safe working practices for ac and dc powered equipment
Reporting Problems with this Manual
Please use this email address to report any problems you find in this guide:
Eaton DC Product Marketing Communications
For Further Information and Technical Assistance
For further information and technical assistance see Worldwide Support section.
Warnings
This section contains important warnings. Read these warnings before installing or operating an Eaton DC
power system.
Electrical Safety
•
Any Eaton dc power systems not pre-installed in a system cabinet must be mounted in an
enclosed cabinet that meets safety and fire enclosure requirements as specified in AS/NZS
60950.1 and EN 60950-1.
•
The dc power system may be powered from multiple ac sources and dc sources. All ac and
dc sources must be isolated before internally servicing the equipment. The practicality of
Summary of Contents for EFX48 e-Fuse Series
