Maintenance and Troubleshooting
Eaton Advanced ePDU User’s Guide P-164000042—Rev 1
www.eaton.com/ePDU
107
Events
The following events are reported:
l
User <Login> logged in by <Interface>
l
User <Login> logged out by <Interface>
l
User <Login> failed to log by <Interface>
l
Switch to bootloader mode for upgrade by <Interface>
l
Send test mail to <Recipient> succeed
l
Send test mail to <Recipient> failed
l
Time changed by user with <Date Time>
l
Network Management Card restarted
l
Network Management Card restart requested by <Interface>
l
Factory reset requested by <Interface>
l
Environment probe connected
l
Environment probe disconnected
l
PDU & System Log cleared
l
Network cable not connected
l
Network cable connected
l
Network cable disconnected
l
Network Management Card reset after error on system resource: ran out Quadnet simple heap
l
Network Management Card reset after error on system resource: queue <Queue Name>
l
Network Management Card cannot initiate communication with the PDU core
l
Error on system resource: task <Task Name>
l
Network Management Card cannot initiate communication with the ePDU core
l
Outlet <iName> switched Off
l
Outlet <iName> switched On
l
Environment Dry Contact 1 state is 0
l
Environment Dry Contact 1 state is 1
l
Environment Dry Contact 2 state is 0
l
Environment Dry Contact 2 state is 1
NOTE 1
Login = User Login
NOTE 2
Interface = “HTTP,” “Telnet,” or “Serial”
NOTE 3
Recipient = Recipient of the e-mail
NOTE 4
Date Time = Logged date and time
NOTE 5
Queue Name = “QUEUE_EMAIL,” “QUEUE_TRAP,” or “QUEUE_SET_HID.”
NOTE 6
Task Name = “TASK_HTTPD,” “TASK_SHUT_HID,” or “TASK_SHUT_HOST.”
NOTE 7
“TASK_EMAIL,” “TASK_TRAP,” “TASK_PER_EMAIL,” “TASK_SNTP,”
“TASK_SENSOR,” “TASK_FILESYSTEM,” “ASK_DISCOVERY,”
“TASK_LINK_STATUS,” or “TASK_HTTPD_LIGHT.”
NOTE 8
iName = Identifying name of outlet
