Advanced Setup Options
5B6729 – May 1997
57
Entering and Exiting Sleep Mode
Description:
Figure 10
When the Processor is in Sleep mode, the Processor
appears to be “off,” but the microprocessor remains
active. Depending upon the configuration of other
options, the components listed below remain off while
the Processor is in Sleep mode:
• Heaters
• Motors
• Solenoids
While the Processor is in the Sleep mode, you cannot
feed films or access any of the Processor setup
screens.
You can manually place the Processor in or out of
Sleep mode in either of 2 ways:
• Simply use the Key located on the feed end of the
Processor.
• Or, use the Soft Keys on the Display Panel to place
the Processor into or out of Sleep Mode.
Note
To fully utilize the Sleep Mode, the Cool Down, and the
Roller Jog features, you must:
1. Leave the main Circuit Breaker CB1 and the wall
Power Switch in the “ON” positions.
2. Leave the water supply on.
3. Leave the Top Cover closed.
H148_0108CA
K
R
S
E
P.I.C.
INTERFACE
Sleep/
Panel
Control
Interface
Breaker CB1
Main Circuit
Receptacle
Safelight
Status Indicators
Cycle Indicators
H148_0108CCA
Wake
Key
Cycle
Key
