OPERATORS MANUAL
34
May 1997 – 5B6729
Selecting Temperature Lockout Mode
Description:
Turning Temperature Lockout ON automatically disables the transport system whenever the developer
temperature deviates from the specified temperature range. The transport system remains disabled
until the temperature of the developer is back within the specified temperature tolerance of
±
0.3
°
C
(0.5
°
F) of the setpoint.
Turning temperature Lockout OFF allows the Processor to accept film even when the developer
temperature deviates from the specified temperature range.
Default Setting: Off
Important
When using accessory equipment, the “Temperature Lockout” must be “OFF” to prevent the accessory
equipment from attempting to feed films with the transport off.
Procedure:
[1] From the Walk-Up Menu, press the “GO TO SETUP” key.
[2] Enter the 4-digit access code.
[3] Press the “MORE” key.
[4] Press the “OPTIONS” key.
[5] Press the “MORE” key.
[6] Press the “TEMP LOCK” key.
[7] Press the “ON or OFF” key.
READY
STD
DRYER
TEMP
SLEEP
SELECT
CYCLE
MORE
GO TO
SETUP
1
2
3
4
CANCEL
REQUEST
▲
▼
CHEM/
CYCLE
MORE
DONE/
RETURN
INFO
SETUP
OPTIONS
DONE/
RETURN
REPLEN
MODE
DAILY
STARTUP
DISPLAY
UNITS
MORE
DONE/
RETURN
ACCESS
CODE
USER
ACCESS
TEMP
LOCK
MORE
DONE/
RETURN
TEMPERATURE LOCKOUT IS ON
ON
OFF
DONE/
RETURN
