OPERATORS MANUAL
30
May 1997 – 5B6729
Selecting the Standby Mode
Description:
The Processor will enter the Standby mode after the trailing edge of the last sheet of film exits the Dryer.
There are 2 modes within the Standby mode — the Interval mode and the Continuous mode. With the
Processor in the Interval mode, the transport system and wash water turn on periodically to keep the
Rollers wet. When the Processor is in the Continuous mode, the transport system will operate
continuously at a reduced speed to keep the Rollers wet. In either mode, the following actions take
place:
• the Dryer Blower and Heater turn on as needed to maintain the temperature of the Dryer.
• the wash water turns on every 8 minutes and remains on for 90 seconds to clean the Rollers.
• the solution Heaters remain on as needed to maintain the setpoint temperature of the solutions.
Default Setting: Interval
Procedure:
[1] From the Walk-Up Menu, press the “GO TO SETUP” key.
[2] Enter the 4-digit access code.
[3] Press the “MORE” key.
[4] Press the “OPTIONS” key.
[5] Press the “MORE” key.
[6] Press the “MORE” key.
[7] Press the “STANDBY MODE” key.
READY
STD
DRYER
TEMP
SLEEP
SELECT
CYCLE
MORE
GO TO
SETUP
1
2
3
4
CANCEL
REQUEST
▲
▼
CHEM/
CYCLE
MORE
DONE/
RETURN
INFO
SETUP
OPTIONS
DONE/
RETURN
REPLEN
MODE
DAILY
STARTUP
DISPLAY
UNITS
MORE
DONE/
RETURN
ACCESS
CODE
USER
ACCESS
TEMP
LOCK
MORE
DONE/
RETURN
STANDBY
MODE
ROLLER
JOG
COOL
DOWN
MORE
DONE/
RETURN
