OPERATORS MANUAL
12
May 1997 – 5B6729
Operating Characteristics
• All menus appearing before the point you are required to enter the access code give you only
20 seconds to press a key. If you do not press a key within that time, the Walk-Up Menu will
appear.
• All menus appearing after the point you are required to enter the access code give you 2 minutes
to press a key. If you do not press a key within that time, the Walk-Up Menu will appear.
• When you first turn on the Processor, the wash water and Drive Motor run for 4 minutes and then
turn off. The Replenishment Pumps also turn on briefly.
• If either the developer or fixer solution evaporated while the Processor was off, the developer and
fixer Tanks will be automatically replenished to their overflow levels when you turn on the
Processor.
• When film is fed, the Drive Motor, the Dryer Blower, and water turn on immediately.
• The Drive Motor will not operate if the Top Cover of the Processor is removed.
• The Display Panel remains illuminated unless the Processor is placed in Sleep Mode. However, if
your Processor is installed in a darkroom and you want the Display Panel to dim when the room is
dark to avoid fogging films, your service provider can enable the roomlight Sensor. Enabling the
Sensor will cause the Display Panel to dim automatically when the room lights are turned off.
• All errors and warnings cause the alarm on the Processor to sound twice when a film is fed into the
Film Detector.
