5B6729 – May 1997
7
Using the Display Panel
The operator can select, change, and monitor processing variables for the
Kodak X-Omat 5000 RA
Processor, using the Display Panel. See the figure below.
Figure 3
Display Panel
The Display Panel provides the following status information of the Processor:
• Ready, Wait, and Service Status Indicators
• Status/Error Messages
• Current cycle
• Current function for each of the Soft Keys
• Developer Temperature
°
C or
°
F Indicator, which provides the current temperature of the developer
in the Processor Tank
• Replenishment Indicator, which illuminates when either Replenishment Pump is operating
Explanation of Status Indicators
The 3 Status Indicators provide the following information:
• If the Green “Ready” Indicator is illuminated, the Processor is ready to accept film.
• If the Yellow “Wait” Indicator is illuminated, the Processor has not yet reached optimum film
processing conditions.
• If the Red “Service” Indicator is illuminated, the Processor is in need of service.
A second set of Status Indicators is located on the feed end of the Processor. These 3 Status Indicators
operate in the same way as the Status Indicators on the Display Panel.
Located below the Status Indicators on the feed end of the Processor, is a second row of Indicators,
which indicate the current film processing cycle.
Indicator Illuminated
Operating Cycle Selected
K
K/RA
R
Rapid
S
Standard
E
Extended
H148_0105BA
H148_0105BCA
Backlit
Messages
Liquid Crystal
Display
Developer
Temperature
Display
Replenishment
Indicator
Soft
Key #1
Soft
Key #2
Soft
Key #4
Degree C/F
Indicator
