Eastey Value VSA2530TK-V1, User Manual

Page: 43 / 88

Troubleshooting 43
Troubleshooting
Problem Possible Cause Solution
Control power lamp
does not light.

Power not connected.

Fuse burned out.

Defective switch.

Disconnected wire.

Replace part.

Switch on power.
No fuse breaker
tripped.

Poor connection.

Electrical leakage.

Check heating wire.

Check all wiring sections.
Conveyor belt can be
pushed by hand.

Belt tension too loose.

Belt tension too tight.

Adjust belt tension screw.

Adjust belt tension screw.
Belt cannot be
pushed by hand.
Failure under Normal
Status.

Defective motor gear
head.

Driving chain tension
too tight.

Disconnected wire.

Defective motor.

Defective contact plug.

Defective relay unit.

Defective limit switch.

Replace part.

Adjust driving chain.

Replace part.
Material outfeed
roller failure.
.

Disconnected wire.

Defective drive motor.

Defective relay unit.

Replace part.
Material moves

Defective brake box.

Wrong material setting
position.

Replace part.

Adjust material setting positon.
Zig-zag line.

Unbalanced material
tension lever.

Wrong tension roller
position.

Wrong triangle
unfolder angle.

Adjust item as required.
Material does not
move.

Film perforator does
not allow film to roll
out.

Adjust spring.