manualshive.com logo in svg

Eagle IntelliMap 642C iGPS, Installation And Operation Instructions Manual

The Eagle IntelliMap 642C iGPS is a cutting-edge fishfinder that takes your angling experience to new depths. Explore waters with confidence using the detailed Installation And Operation Instructions Manual, available for free download at our website. Unlock the full potential of this remarkable device and embark on your next fishing adventure effortlessly.

Share
Download
background image

v

Earth Map Detail .................................................................. 141
Pop-up Map Information ...................................................... 142
Draw Map Boundaries .......................................................... 142
Fill Water With White .......................................................... 142
Map Overlays (Range Rings; Lat/Long Grid) ...................... 142

Map Datum Selection ............................................................... 142
Map Detail Category Drawn .................................................... 143
Map Orientation ....................................................................... 144
NauticPath

 USA Marine Charts........................................... 145

Nautical Chart Notes............................................................ 145
Port Information ................................................................... 146
Tidal Current Information ................................................... 147
Tide Information ................................................................... 149

Navionics

 Charts..................................................................... 150

Pop-up Help............................................................................... 151
Reset Options ............................................................................ 152
Require WAAS .......................................................................... 152
Screen Contrast and Brightness .............................................. 153
Set Language ............................................................................ 154
Set Local Time .......................................................................... 154
Show WAAS Alarm................................................................... 154
Software Version Information.................................................. 155
Sounds Menu............................................................................. 156
Track Smoothing....................................................................... 156
Trail Options ............................................................................. 157

General Trail Options ....................................................... 157
Specific Trail Options........................................................ 159

Trail Visibility and Other Trail Options.............................. 159

Transparency ............................................................................ 159

To adjust Transparency level: .............................................. 160

Units of Measure....................................................................... 160

Section 9: Searching ............................................................. 161

Find Addresses.......................................................................... 162
Find Any Item Selected by Map Cursor .................................. 164
Find Interstate Highway Exits ................................................ 165
Find Map Places or Points of Interest (POI) ........................... 167
Find Streets or Intersections.................................................... 169

Find a Street ......................................................................... 169
Find an Intersection ............................................................. 170

Find Waypoints ......................................................................... 172

Section 10: Supplemental Material ................................... 175

Summary of Contents for IntelliMap 642C iGPS





































































































































































































Reviews:

No comments

Related manuals for IntelliMap 642C iGPS

Garmin echo 550c Installation Instructions Manual preview
echo 550c
Brand: Garmin Pages: 6
Raymarine CP200 Installation Instructions Manual preview
CP200
Brand: Raymarine Pages: 47
Garmin 190-00864-01 Quick Start Manual preview
190-00864-01
Brand: Garmin Pages: 24

Brands by name

Popular brands

Load more brands