manualshive.com logo in svg

Eagle IntelliMap 642C iGPS, Installation And Operation Instructions Manual

The Eagle IntelliMap 642C iGPS is a cutting-edge fishfinder that takes your angling experience to new depths. Explore waters with confidence using the detailed Installation And Operation Instructions Manual, available for free download at our website. Unlock the full potential of this remarkable device and embark on your next fishing adventure effortlessly.

Share
Download
background image

148

zoomed in to a 6-mile range. The icon stands for a Tidal Current Sta-
tion location. An example is displayed on the right.

When you zoom in to a sufficiently small zoom range (0.8 nautical
mile), the icon becomes an animated arrow showing tidal current ve-
locity and direction 

for the selected tidal station

 at the present time. At

larger zoom ranges, you can select the boxed "

C

" icon and it becomes an

animated arrow with a pop-up name box (the name box disappears af-
ter a few seconds). Examples are displayed in the following figures.

To view Tidal Current information:

1. Use the arrow keys to move the cursor over a Tidal Current Station
icon. When it is selected, a pop-up name box appears.

2. Press 

WPT

 to display the Tidal Current Information screen.

  

NauticPath chart showing Tidal Current Station icon selected by cur-

sor (left).  Icon animates automatically at .08-mile zoom range (right).

Current Information screen.

Cursor
lines

Tidal Current
Station icon in
animated mode

Slack Water Line

Current Time Line

Velocity
Scale

Tide Tables

Summary of Contents for IntelliMap 642C iGPS





































































































































































































Reviews:

No comments

Related manuals for IntelliMap 642C iGPS

Brands by name

Popular brands

Load more brands