Eagle IntelliMap 642C iGPS Installation And Operation Instructions Manual Download

Page: 172 / 196

164

8. To navigate to the address, press

MENU

select

and press

ENT

The unit will begin showing navigation information to the address. If
you are only looking up an address, highlight

IND

and press

ENT

. The

map page will appear with the cursor crosshairs centered on the ad-
dress.

Tip:

If the address happens to be an item in the Point of Interest data-
base, you can look up the item's phone number in the Waypoint In-
formation list. With the address selected by the cursor on the map,
press

WPT

. The POI's Waypoint Information window appears, with

the Go To Waypoint command highlighted. If you want to go ahead
and navigate to the POI address, just press

ENT

EXIT

Map Page showing location of the address on the map, highlighted by

cursor (left). This address is a business in the POI database, so you can

display the POI information window, then navigate to it (center). This

address (right) is not in the POI database, so the Waypoint key will not

display any information for it.

Find Any Item Selected by Map Cursor

On the Map Page with a POI or map feature selected by the cursor
press

WPT.

To return to the main page display, press

EXIT

Summary of Contents for IntelliMap 642C iGPS




































































































































































































Search results

Summary of Contents for IntelliMap 642C iGPS

Reviews:

Related manuals for IntelliMap 642C iGPS

Brands by name

Popular brands

Eagle IntelliMap 642C iGPS, Installation And Operation Instructions Manual

Search results

Summary of Contents for IntelliMap 642C iGPS

Reviews:

Related manuals for IntelliMap 642C iGPS

Brands by name

Popular brands