manualshive.com logo in svg

Eagle IntelliMap 642C iGPS, Installation And Operation Instructions Manual

The Eagle IntelliMap 642C iGPS is a cutting-edge fishfinder that takes your angling experience to new depths. Explore waters with confidence using the detailed Installation And Operation Instructions Manual, available for free download at our website. Unlock the full potential of this remarkable device and embark on your next fishing adventure effortlessly.

Share
Download
background image

107

Navigate to Cursor Position on Map

The

 

G

O 

T

O 

C

URSOR

 command navigates to the current cursor position on

the map. It is a quick way to navigate to anything you can see on the
map display.

1. Use the cursor with the zoom in and zoom out keys to move around
the map until you find a location you want to go to.

2. Center the cursor over the location to select it. See the example in
the following figure. Map items like waypoints, Points of Interest and
towns among others, can be selected and appear highlighted with a
pop-up box. Other features, such as a river or a street intersection will
not appear highlighted, but the cursor will take you to those locations
just the same.

   

The cursor crosshairs are centered on Oologah, Oklahoma.

3. Press 

MENU

|

ENT

 and the unit will begin navigating to the cursor lo-

cation.

The Map Page will display a red line from your current position to the cur-
sor position. The Navigation Page displays a compass rose showing naviga-
tion information to your destination. See the following examples.

Summary of Contents for IntelliMap 642C iGPS





































































































































































































Reviews:

No comments

Related manuals for IntelliMap 642C iGPS

Garmin STRIKER Vivid 4 Owner'S Manual preview
STRIKER Vivid 4
Brand: Garmin Pages: 41
Signstek FF-003 User Manual preview
FF-003
Brand: Signstek Pages: 36

Brands by name

Popular brands

Load more brands