Eagle IntelliMap 500C Installation And Operation Instructions Manual Download Page 123

Page: 123 / 140

117

wanted to, you could select another waypoint from the list with the

↑

↓

keys.)

To navigate

to the waypoint, press

ENT

. (The Go To Waypoint

command is already highlighted.) The unit will show navigation infor-
mation to the waypoint.

To find

the waypoint, press

→

IND

ENT

. The Map

Page appears with the cursor highlighting the found waypoint.

Waypoint Information screens with the Go To Waypoint command se-

lected, left, and the Find on Map command selected, right.

To clear these menus and return to the previous page, press

EXIT

re-

peatedly.

If you're looking

by name

, there are two options:

You can

spell

out

the name in the top selection box. Press

↑

↓

to change the first

letter, then press

→

to move the cursor to the next letter and repeat

until the name is correct, then press

ENT

Or you can jump

down to the lower selection list by pressing

ENT

, then press

↓

↑

select a waypoint from the list, then press

ENT

. The waypoint informa-

tion screen appears.

Summary of Contents for IntelliMap 500C












































































































































Search results

Summary of Contents for IntelliMap 500C

Reviews:

Related manuals for IntelliMap 500C

Brands by name

Popular brands

Eagle IntelliMap 500C, Installation And Operation Instructions Manual

Search results

Summary of Contents for IntelliMap 500C

Reviews:

Related manuals for IntelliMap 500C

Brands by name

Popular brands