Eagle IntelliMap 500C, Installation And Operation Instructions Manual

Page: 10 / 140

4
Zoom range:
.................... 40 ranges; 0.02 to 4,000 miles.
NOTE:
The above memory capacities refer only to the IntelliMap 500C's on-
board memory. The amount of GPS data you can record and save for
recall later is limited only by the number of MMC cards you have.
NOTICE!
The storage temperature range for your IntelliMap 500C is from -4 de-
grees to +167 degrees Fahrenheit (-20 degrees to +75 degrees Celsius).
Extended storage in temperatures higher or lower than specified will
damage the liquid crystal display in your unit. This type of damage is not
covered by the warranty.
For more information, contact the factory's Cus-
tomer Service Department; phone numbers are listed on the last page of
this manual.
How GPS Works
You'll navigate faster and easier if you understand how the IntelliMap
500C scans the sky to tell you where you are on the earth – and, where
you're going. (But if you already have a working understanding of GPS
receivers and the GPS navigation system, skip on ahead to Section 2,
Installation & Accessories on page 11. If you're new to GPS, read on.
You can later impress your friends with your new-found knowledge.)
First, think of your unit as a small but powerful computer. (But don't
worry — we made it easy to use, so you don't need to be a computer ex-
pert to find your way!) The IntelliMap 500C includes a keypad and a
screen with menus so you can tell it what to do. The screen also lets the
unit show your location on a moving map, as well as point the way to
your destination.
This gimbal-mounted IntelliMap 500C uses an external an-
tenna/receiver module, which makes the whole system work something
like your car radio. But instead of your favorite dance tunes, this re-
ceiver tunes in to a couple of dozen GPS satellites circling the earth. (It
will also listen in to the WAAS satellites in orbit, but more about that
in the upcoming segment introducing you to GPS and WAAS.)
Your unit listens to signals from as many satellites as it can "see" above
the horizon, eliminates the weakest signals, then computes its location
in relation to those satellites. Once the IntelliMap 500C figures its lati-
tude and longitude, it plots that position on the moving map shown on
the screen. The whole process takes place several times a second!
The performance doesn't stop there. Stored in the permanent memory
of each unit is a basic background map of the
entire world. We lock it in
here at the factory — you can't change or erase this map.