Eagle IntelliMap 500C Installation And Operation Instructions Manual Download Page 108

Page: 108 / 140

102

Main Menu with Transparency command selected.

To adjust Menu Transparency level:

Press

MENU

↓

RANSPARENCY

ENT

. The

RANSPARENCY

slider bar

appears. Press

↑

↓

to move the bar. The lower end of the scale makes

the menus opaque; the upper end is maximum transparency.

Units of Measure

This menu sets the speed and distance (statute or nautical miles, me-
ters), depth (feet, fathoms, or meters), temperature (degrees Fahrenheit
or Celsius), altitude (feet or meters) and heading (true or magnetic)
units. To change the units:

Press

MENU

↓

YSTEM

ETUP

ENT

Main Menu, System Setup submenu, left; Units of Measure Menu, right.

To set Unit of Measure:

Use

↑

↓

to select the desired category and

press

ENT

. Use

↑

↓

to select the desired unit of measure and press

ENT

If you wish, you can now pick another category to change. After the op-
tion is set, press

EXIT

to return to the page display.

Summary of Contents for IntelliMap 500C












































































































































Search results

Summary of Contents for IntelliMap 500C

Reviews:

Related manuals for IntelliMap 500C

Brands by name

Popular brands

Eagle IntelliMap 500C, Installation And Operation Instructions Manual

Search results

Summary of Contents for IntelliMap 500C

Reviews:

Related manuals for IntelliMap 500C

Brands by name

Popular brands