manualshive.com logo in svg

Eagle FISHSTRIKE 1000C, Installation And Operation Instructions Manual

The Eagle FISHSTRIKE 1000C is an incredible fish finder that guarantees an exceptional fishing experience. To ensure smooth installation and operation, we provide an easy-to-follow "Installation And Operation Instructions Manual" free for download. Visit our website manualshive.com and get the comprehensive manual to maximize your fishing prowess.

Share
Download
background image

84

Stop Chart

If you are running multiple units on a boat or using this unit in a car,
there are times when you may want to turn off the sonar. This
command turns off the sonar and stops the chart from scrolling. Sonar
restarts automatically each time you turn on your unit.

Press 

MENU

|

↓

 to 

S

TOP 

C

HART

|

ENT

|

EXIT

.

To turn on sonar and start the chart scrolling again, repeat the above step.

Sonar Menu with Stop Chart command selected. The box is unchecked,

indicating the chart is scrolling across the screen.

Surface Clarity

The markings extending downward from the zero line on the chart are
called "surface clutter." These markings are caused by wave action,
boat wakes, temperature inversion and more.

The surface clarity control reduces or eliminates surface clutter signals
from the display. It does this by changing the sensitivity of the receiver,
decreasing it near the surface and gradually increasing it as the depth
increases.

There are three levels of surface clarity available: low, medium, or high.
It can also be turned off. The default level is off.

To adjust the Surface Clarity level:

1. From the Sonar Page, press 

MENU

|

↓

 to 

S

ONAR 

F

EATURES

|

ENT

.

Summary of Contents for FISHSTRIKE 1000C













































































































































































































Reviews:

No comments

Related manuals for FISHSTRIKE 1000C

Humminbird 1100 Series Installation preview
1100 Series
Brand: Humminbird Pages: 4
Humminbird 898 c SI Quick Operation Manual preview
898 c SI
Brand: Humminbird Pages: 2
Humminbird AS RSL Operation Manual preview
AS RSL
Brand: Humminbird Pages: 13
Humminbird 778c HD XD Operation Manual preview
778c HD XD
Brand: Humminbird Pages: 107
Humminbird ICE Flasher 55 Installation And Operation Manual preview
ICE Flasher 55
Brand: Humminbird Pages: 44
Humminbird 778C Operation Manual preview
778C
Brand: Humminbird Pages: 110
Humminbird Matrix 10 Operation Manual preview
Matrix 10
Brand: Humminbird Pages: 60
Humminbird 947C Installating And Operation Manual preview
947C
Brand: Humminbird Pages: 91
Humminbird 788c Operation Manual preview
788c
Brand: Humminbird Pages: 193
Humminbird 788ci HD DI Operation Manual preview
788ci HD DI
Brand: Humminbird Pages: 202
Humminbird 768 combo Operation Manual preview
768 combo
Brand: Humminbird Pages: 194
Humminbird 967C Installation And Operation Manual preview
967C
Brand: Humminbird Pages: 143
Humminbird 917C Installation And Operation Manual preview
917C
Brand: Humminbird Pages: 141
Humminbird 997c SI Combo Installation And Operation Manual preview
997c SI Combo
Brand: Humminbird Pages: 151
Humminbird 858 HD DI Operation Manual preview
858 HD DI
Brand: Humminbird Pages: 142
Humminbird 858c Combo Installation And Operation Manual preview
858c Combo
Brand: Humminbird Pages: 160
Humminbird 798ci HD SI Combo Operation Manual preview
798ci HD SI Combo
Brand: Humminbird Pages: 200

Brands by name

Popular brands

Load more brands