Eagle FISHSTRIKE 1000C, Installation And Operation Instructions Manual

Page: 80 / 204

72
Gauge menu with setup highlighted.
To change setup menu, scroll down, highlight setup and press
ENT
. Use
→ ←
to select desired setup mode, then press
ENT.
There are four primary setup options in the analog menu: Themes, Tick
Marks, Thresholds and Text. You can make gauges transparent from
all the setup menus except Text Setup. For advanced information on
Overlay Data Style skip ahead to page 157.
Ping Speed & HyperScroll

Ping Speed controls the rate at which the transmitter and transducer
broadcast sonar sound waves — pings — into the water. The unit has a
default ping speed of 50 percent. At normal boating speeds, this
automatically provides enough return echoes to refresh the screen and
scroll the chart at maximum chart speed.
However, when you are running at high speeds, or just want the fastest
possible screen update, you may want to use the HyperScroll

feature.
When you change the Ping Speed to any setting greater than 50
percent, the unit automatically enters HyperScroll mode.
These faster ping rates allow you to maintain a high-detail picture on
the screen, and the screen refresh rate and chart scroll speed can keep
pace with the boat as it moves quickly over the bottom terrain.
When using HyperScroll, you may also need to manually decrease the
sensitivity for optimum performance. Depending on water depth and
other conditions, HyperScroll may cause a second bottom echo to return
to the transducer during the next ping cycle, or sounding. This can result
in a large amount of clutter appearing on the screen. If this occurs, just
decrease the sensitivity to a level that eliminates the clutter. When you
turn HyperScroll off, you can return to your original sensitivity level.