manualshive.com logo in svg

Eagle FISHSTRIKE 1000C, Installation And Operation Instructions Manual

The Eagle FISHSTRIKE 1000C is an incredible fish finder that guarantees an exceptional fishing experience. To ensure smooth installation and operation, we provide an easy-to-follow "Installation And Operation Instructions Manual" free for download. Visit our website manualshive.com and get the comprehensive manual to maximize your fishing prowess.

Share
Download
background image

33

communication port. Com port one (Com-1) can be used to receive
NMEA format GPS data. The com port can also transmit NMEA format
GPS data to another device.

The optional data cable will contain three wires. Com-1 uses the yellow
wire to transmit, the orange wire to receive and the shield wire for
signal ground.

Com-1 wiring to receive NMEA position information

from some other GPS receiver.

Com-1 wiring to transmit NMEA position information

to another NMEA-compatible device.

Read your other product’s owner’s manual for more wiring information.

Power Connections

The unit works from a 12-volt battery system. For the best results,
attach the power cable directly to the battery. You can attach the power
cable to an accessory or power buss, however you may have problems
with electrical interference. Therefore, it's safer to go ahead and attach
the power cable directly to the battery.

Caution:

When using the unit in a saltwater environment, we strongly
recommend that you shut off the power supply to the power cable
when the unit is not in use. When the unit is turned off but still
connected to a power supply, electrolysis can occur in the power
cable plug. This may result in corrosion of the plug body along with
the electrical contacts in the cable and the unit's power socket.

In saltwater environments we recommend you connect the power
cable to the auxiliary power switch included in most boat designs.
If that results in electrical interference, or if such a switch is not
available, we recommend connecting direct to the battery and
installing an inline switch. This will let you shut off power to the
power cable when the unit is not in use. When you are not using

Ground

To Other

Device

Orange (Receive)

NMEA Transmit

Shield (Ground)

Ground

Com-1 to

your unit

To Other

GPS Receiver

Com-1 to

your unit

Yellow (Transmit)

NMEA Receive

Shield (Ground)

Summary of Contents for FISHSTRIKE 1000C













































































































































































































Reviews:

No comments

Related manuals for FISHSTRIKE 1000C

FLIR E70290 Installation & Operation Instructions preview
E70290
Brand: FLIR Pages: 136

Brands by name

Popular brands

Load more brands