manualshive.com logo in svg

Eagle FISHSTRIKE 1000C, Installation And Operation Instructions Manual

The Eagle FISHSTRIKE 1000C is an incredible fish finder that guarantees an exceptional fishing experience. To ensure smooth installation and operation, we provide an easy-to-follow "Installation And Operation Instructions Manual" free for download. Visit our website manualshive.com and get the comprehensive manual to maximize your fishing prowess.

Share
Download
background image

18

1. Assembling the bracket.

A. One-piece bracket:

 Press the two small plastic ratchets into the

sides of the metal bracket as shown in the following illustration. Notice
there are letters molded into each ratchet. Place each ratchet into the
bracket with the letter "A" aligned with the dot stamped into the metal
bracket. This position sets the transducer's coarse angle adjustment for a
14

°

 transom. Most outboard and stern-drive transoms have a 14

°

 angle.

Align plastic ratchets in bracket.

B.

 

Two-piece bracket:

 Locate the four plastic ratchets in the

transducer's hardware package. Press two ratchets into the sides of the
plastic bracket and two on either side of the transducer as shown in the
following illustrations. Notice there are letters molded into each ratchet.

Place the ratchets into the bracket with the letter "A" aligned with the
alignment mark molded into the bracket. Place the ratchets onto the
transducer with the letter "A" aligned with the 12 o'clock position on
the transducer stem. These positions set the transducer's coarse angle
adjustment for a 14

°

 transom. Most outboard and stern-drive transoms

have a 14

°

 angle.

Insert and align ratchets.

Alignment letters

Alignment

positions

Transducer bracket

Transducer

Dot

Summary of Contents for FISHSTRIKE 1000C













































































































































































































Reviews:

No comments

Related manuals for FISHSTRIKE 1000C

Icom Marine Commander MXF-5000 Instruction Manual preview
Marine Commander MXF-5000
Brand: Icom Pages: 16
Eagle FishStrike 2000 Installation And Operation Instructions Manual preview
FishStrike 2000
Brand: Eagle Pages: 200
Eagle Cuda 240 S/GPS Installation And Operation Instructions Manual preview
Cuda 240 S/GPS
Brand: Eagle Pages: 140
Interphase Echo 220 Operation Manual preview
Echo 220
Brand: Interphase Pages: 16
Interphase Echo 600 Operation Manual preview
Echo 600
Brand: Interphase Pages: 18
Interphase 50-200 User Manual preview
50-200
Brand: Interphase Pages: 35
Humminbird Piranha Max 30 Operation Manual preview
Piranha Max 30
Brand: Humminbird Pages: 12
Humminbird Matrix 15 Operation Manual preview
Matrix 15
Brand: Humminbird Pages: 16
Humminbird Legend 1000 Operating Instructions Manual preview
Legend 1000
Brand: Humminbird Pages: 18
Humminbird HELIX 5 SERIES Installation Manual preview
HELIX 5 SERIES
Brand: Humminbird Pages: 8
Humminbird Legend 3000 Operation Manual preview
Legend 3000
Brand: Humminbird Pages: 18
Humminbird HELIX 8 CHIRP MEGA SI+GPS G3N Quick Start Manual preview
HELIX 8 CHIRP MEGA SI+GPS G3N
Brand: Humminbird Pages: 12
Humminbird Piranha 3 Operation Manual preview
Piranha 3
Brand: Humminbird Pages: 24
Humminbird ICE HELIX Series Installation Manual preview
ICE HELIX Series
Brand: Humminbird Pages: 16
Humminbird LCR 3004 Operation Manual preview
LCR 3004
Brand: Humminbird Pages: 21
Humminbird LCR 400 ID Operation Manual preview
LCR 400 ID
Brand: Humminbird Pages: 28
Humminbird LCR 3D Operation Manual preview
LCR 3D
Brand: Humminbird Pages: 27
Humminbird CH Thirty II Operation Manual preview
CH Thirty II
Brand: Humminbird Pages: 15

Brands by name

Popular brands

Load more brands