E-Swin WE-O, User Manual, Page: 52 / 64

52
MAINTE NANCE
Check that your is unplugged when you are undertaking its maintenance. If you intervene after using , you must wait
for the fan of the device to come to a complete stop before unplugging the base. This enables, among other things, the optical parts
to cool off properly.
NOTE:
Unlike the fans located in the applicator that stop after a certain period, fans located at the base will continue to work until
the final disconnection of the power cord of the device.
y
BASE
PLASTIC PARTS
Do not clean the inside of the slot dedicated to the activation card.
All plastic parts of the device must be cleaned with a clean cloth,
dampened with water (without any additives).
TOUCHSCREEN
The screen must be cleaned with a clean cloth that has been
dampened with the spray
Clean
(never spray
Clean
directly on
the touch screen).
POWER CORD
Check its perfect condition (must not be pinched or crushed, no
bare wires). Clean with a cloth that has been dampened with
water (without any additives).
y
APPLICATOR
MOBILE HEAD
Cleaning the optical parts (internal and external) of the mobile
head with the spray
Clean
before and after each use retains
your ’s effectiveness. Never spray
Clean
directly on the
internal parts of the applicator.
B
ODY OF THE APPLICATOR
All plastic parts of the applicator must be cleaned with a clean
cloth that has been dampened with water (without any additives).