E-Swin WE-O, User Manual, Page: 46 / 64

46
SOFTWARE OPTIONS
y
SOFTWARE OPTIONS
When you turn on , once the home page has been accessed, 4 menus are available
(screen A ).
1) “ HAIR REMOVAL
” menu, icon
1
.
See section on “REMOVING HAIR WITH ”.
2) “ COLLAGEN STIMULATION
” menu, icon
2
.
See section on “STIMULATING COLLAGEN SYNTHESIS WITH ”.
3) “ CONSUMABLES
” menu, icon
3
.
This menu shows the number of flashes remaining.
4) “ CONFIGURATION
” menu, icon
4
.
This menu allows you to access the following 6 sub-menus (screen
E
):
PIN CODE
(screen J )
• The default PIN code is “0000”. If you do not alter this code, you will not be asked to enter it
when starting up the device. However, if you change the default PIN code, you will be asked
to insert your own PIN whenever
is started.
• To change the PIN code: - Access the “ CONFIGURATION “ menu.
- Select the “PIN code” sub-menu.
• Using the digital keypad:
- Enter the current PIN code and validate using the “V” key.
- Enter the new PIN code and validate using the “V” key.
- A message indicating that the codes have been validated will then appear. Click on
“OK”.
- The “
CONFIGURATION ” menu will be displayed.
• At any time, it is possible to return to the “ CONFIGURATION ” menu by pressing on
9
. The
“ C “ key allows the number in each box to be corrected.
E
J
9
IMPORTANT:
You are strongly advised to make a note of your PIN code. If you have entered a PIN code which you no
longer remember, you will need to return your technical department will be able to operate on your
accessible out-of-guarantee, and will be billed to you accordingly.
A
4
1 2
3