E-Swin WE-O, User Manual, Page: 40 / 64

40
CHANGING
OPTIC
CARTRIDGE
y
STEP 1
CHECKING THE NUMBER OF FLASHES AVAILABLE
You can monitor your flash usage in real time (see icon indicating the number of flashes
remaining
7
).
When the flash credit reaches zero, the main “Depilation” menu instantly becomes
inactive and appears in a grey colour (screen
G
).
The
Optic
cartridge must be replaced when the number of flashes
reaches zero.
G
7
y
STEP 2
COOLING OF OPTICAL PARTS
During the procedure for the replacement of the
Optic
cartridge, before turning off and unplugging your device, you must wait
until the fans in the applicator have stopped running (this may take several minutes). This procedure allows the internal optical parts
of the applicator to cool.
NOTE:
• When is used in “Hair removal” mode, the number of flashes decreases 1 by 1.
• When is used in “Collagen stimulation” mode, the number of flashes decreases 3 by 3.
y
CHANGING THE
OPTIC
CARTRIDGE
• For the very first use, is already equipped with an
Optic
cartridge .
• Each
Optic
cartridge is associated with an activation card.
• A device may be used by several persons, each of whom will have their own
Optic
cartridge, associated with its own activation
card.
• Replacement of the
Optic
cassette must be undertaken with the utmost care. Improper handling may result in permanent damage
to the applicator, and to in general. The guarantee does not cover improper handling. We therefore recommend that you pay
very careful attention to the procedure to be observed.
• You may have occasion to replace the
Optic
cartridge before the originally scheduled number of flashes has been exhausted, e.g. in
case of a change of user, where a tube has been broken, where the
Optic
cartridge is no longer working, etc.
NOTE:
Unlike the fans in the applicator, which will stop running after a certain time, the fans in the base will continue to run until
the final disconnection of the mains lead of the device.