E-Swin WE-O, User Manual, Page: 20 / 64

20
USING
y
START-UP
• Upon the initial start-up of , “activation codes” (5 characters, followed
by a further 5 characters) may be requested. Once entered, these codes will
not be requested a second time.
• Connect using the mains lead.
• The internal testing procedure of will commence, and will last a
few seconds. Upon the completion of this phase, screen F will be displayed
automatically.The software version of the device is displayed at the bottom left
of the screen and, below this, the name of the device and its version number.
• A personalized 4-digit PIN code may also be entered (see chapter on software
options in the present manual).
y
IMPORTANT
operates using an activation card. This arrangement will apply whenever
an
Optic
cartridge (and its associated activation card) are replaced. Once the
new
Optic
cartridge is fitted, simply insert the new activation card into the base
to obtain a further 3,000 flashes.
• When is used in “hair removal” mode, the number of flashes will
decrease 1 by 1.
• When is used in “collagen stimulation” mode, the number of flashes
will decrease 3 by 3.
F