E-Swin WE-O, User Manual, Page: 37 / 64

37
y
STEP 5
END OF THE SESSION
• Press the stop/start button (icon
11
).
• The fans will continue to run for approximately 10 minutes. Do not disconnect the mains
lead while the fans are still running. Amongst other functions, this ensures the correct
cooling of the optical components.
• Unlike the fans in the applicator, which will stop after a certain time, the fans in the base
will continue to run until the final disconnection of the mains lead of the device.
• Using the
Clean
spray (photo 18 ), clean the glass end of the applicator (optical guide).
To do this, apply the
Clean
spray in advance to a lint-free cloth (photo
19
) and clean
the optical guide (photo 20 ).
• It is also possible to maintain the base in which the applicator is fitted (by rinsing in
water, ensuring that it is dry again by the time the applicator is re-fitted). To do this,
release the smoked black base by holding the two tabs on either side (photos
21 & 22 ).
18
19
20
22 21
is in charging mode between two flashes. This charging phase is
indicated by a red light on the top of the applicator and a red light on either
side of the screen. The applicator must not be used again until the green
indicator light is illuminated. If the applicator is pressed against the skin too
early (before the green indicator light is illuminated), it will not be possible
to trigger a flash.
NOTE:
After the session, small red spots may appear. This is a normal reaction, and the spots will clear rapidly.
STIMULATING COLLAGEN SYNTHESIS WITH