manualshive.com logo in svg

E.F. Johnson Company 5100 ES, Operating Manual

The E.F. Johnson Company 5100 ES Service Manual is essential for anyone looking to maximize the potential of their device. This comprehensive manual covers every aspect of the product, providing detailed instructions and troubleshooting tips. Download this user manual for free from manualshive.com to unlock the full potential of your device.

Share
Download
background image

ES Series Models II/III Portable Radio Operating Manual

 6-19

SMARTNET / SmartZone / P25 Trunked Features

6.12.5 Locking / Unlocking a Site

It is sometimes desirable to stay on a site. To prevent the radio from searching for a new 
site, lock it on the current site by pressing the Site Lock option button or selecting that 
menu parameter. The display shows the flashing 

. icon to indicate that the site is 

locked. To unlock the site, press the Site Lock button again, (or the <

F2

> Select button), 

until “Unlock” is momentarily displayed.

6.12.6 Auto Site Search

Auto site search automatically searches sites and ranks them in a “Best Sites” list. The list 
is made up of all sites in the site list that share the highest site rank or have a site rank of 
less than the highest site rank. Sites are sorted by RFSS ID/Zone and then by Site ID.

Auto Site search is selected by the Auto Site Search option button or by menu selection.

1

Press the Auto Site Search option button (or select the menu parameter) to display the 
current site number and RSSI level of the current site.

2

Press and hold the Auto Site Search option button (or use the menu) to move from the 
current site and scroll through the “Best Sites” list.

If menu selection is used, two items can be displayed:

- “Site Disp” displays the current site number or alias and RSSI indicator.

- “Auto Site” moves from the current site to the next (or first) site in the Best Sites list.

Note

Sites on the “Best Sites” list are constantly re-ranked by the roaming algorithm, so 
changes to the list are not uncommon.

6.12.7 ZoneFail Site Lock

This is an optional feature that can be enabled only by factory programmed. It does not 
require any special inputs from the infrastructure to operate. This feature is intended to 
prevent some of the confusion resulting from a site controller failure. When this occurs, all 
sites go into the Site Trunking mode and radios will be unable to roam normally. The 
result is that the various radios selected by a particular talkgroup may be operating on 
different sites and are unable to talk to each other (see Section 6.12.3 for more Site 
Trunking information).

Summary of Contents for 5100 ES





















































































































































































































Reviews:

No comments

Related manuals for 5100 ES

jcb G20 Operator'S Manual preview
G20
Brand: jcb Pages: 177
GOWIN RED-M800B Quick Start Manual preview
RED-M800B
Brand: GOWIN Pages: 2
Scott DXi 50 WL Instruction Manual preview
DXi 50 WL
Brand: Scott Pages: 14
Durabrand PDV-708U Instruction Manual preview
PDV-708U
Brand: Durabrand Pages: 28
Maxon SL100K User Manual preview
SL100K
Brand: Maxon Pages: 73
BRIGHT 022280 Operating Instructions Manual preview
022280
Brand: BRIGHT Pages: 69
Rally 7471 Manual preview
7471
Brand: Rally Pages: 4
Briggs & Stratton 6344 Installation Instructions Manual preview
6344
Brand: Briggs & Stratton Pages: 8
EarthQuake IG800W Operator'S Manual preview
IG800W
Brand: EarthQuake Pages: 84
Philips AE1000 Owner'S Manual preview
AE1000
Brand: Philips Pages: 2
Philips AE 6570 Quick Start Manual preview
AE 6570
Brand: Philips Pages: 2
Philips 23RL475 Quick Start Manual preview
23RL475
Brand: Philips Pages: 4
Millenium Signatures MS-510 Instruction Manual preview
MS-510
Brand: Millenium Signatures Pages: 7
L&R 4002 Series Operator'S Manual preview
4002 Series
Brand: L&R Pages: 10
Telefunken TF-1593 Instruction Manual preview
TF-1593
Brand: Telefunken Pages: 14
Teledyne SFG-20 Series User Manual preview
SFG-20 Series
Brand: Teledyne Pages: 126
Steljes Audio SA60 User Manual preview
SA60
Brand: Steljes Audio Pages: 44
Electro Adda G Series Operating Instructions Manual preview
G Series
Brand: Electro Adda Pages: 31

Brands by name

Popular brands

Load more brands