manualshive.com logo in svg

E.F. Johnson Company 5100 ES, Operating Manual

The E.F. Johnson Company 5100 ES Service Manual is essential for anyone looking to maximize the potential of their device. This comprehensive manual covers every aspect of the product, providing detailed instructions and troubleshooting tips. Download this user manual for free from manualshive.com to unlock the full potential of your device.

Share
Download
background image

11-6 

ES Series Models II/III Portable Radio Operating Manual

Secure Communication (Encryption)

• When a secure call is received on a digital channel in either the secure or clear mode, 

this icon flashes.

• When a clear call is received on a digital channel in the secure mode, this icon is on 

continuously.

• An option can be programmed to sound a beep whenever a secure call is received on a 

clear channel.

11.3 Clear / Secure Strapping

11.3.1 Transmit Mode Options

The following transmit options are available when encryption is selected:

“Clear” - All calls are in the clear mode unless responding to a secure call. If the 
response is then made within the delay time, it occurs in the secure mode.

“Secure” - All calls are made in the selected secure mode.

“Switched” - The mode is selected by the Clear/Secure button. When the clear mode is 
selected by this button and a secure call is received, or vice versa, you will hear a beep. 
Press the programmed option button to change to the appropriate mode.

If the channel has been strapped “Clear” and the option button selects the “Secure” mode 
on power up and a transmission is attempted, transmitting is disabled. Likewise, if the 
channel is strapped “Secure” and the option button selects the “Clear” mode on power up 
and a transmission is attempted, the transmitter is disabled. 

The radio can be programmed to ignore the “Clear” or “Secure” button setting. These 
preceding indications then do not occur and transmissions always occur in the strapped 
mode.

Note

If all channels/talkgroups are strapped clear or secure and no Clear/Secure option button 
or menu parameter is programmed, this parameter must always be selected (see 
following).

If the Clear/Secure button or menu parameter are not programmed, the radio is always in 
the last known state (usually Clear) and there is no way to change it. For example, if the 
last known state is Clear and this parameter is not selected, it is never possible to transmit 
a Secure message on a channel strapped Secure. An error tone sounds.

Summary of Contents for 5100 ES





















































































































































































































Reviews:

No comments

Related manuals for 5100 ES

Garmin inReach User Manual preview
inReach
Brand: Garmin Pages: 11
SOUNDMASTER Highline TR 85 Operating Instructions Manual preview
Highline TR 85
Brand: SOUNDMASTER Pages: 6
Sentry SOUND-BOX HR100 Manual preview
SOUND-BOX HR100
Brand: Sentry Pages: 4
MAJORITY Madingley Hall CB23-DAB-WHT/BLK User Manual preview
Madingley Hall CB23-DAB-WHT/BLK
Brand: MAJORITY Pages: 20
RIP TUNES RACR-400 User Manual preview
RACR-400
Brand: RIP TUNES Pages: 42
Wacker Neuson GS 5.6A Operator'S Manual preview
GS 5.6A
Brand: Wacker Neuson Pages: 42
nedis RDIN5005BK Quick Start Manual preview
RDIN5005BK
Brand: nedis Pages: 100
Eton WEATHER TRACKER FR800 User Manual preview
WEATHER TRACKER FR800
Brand: Eton Pages: 40
ZIPPER MASCHINEN ZI-STE11000 User Manual preview
ZI-STE11000
Brand: ZIPPER MASCHINEN Pages: 39
ApexRadio 700DTA Quick Start Manual preview
700DTA
Brand: ApexRadio Pages: 2
Generac Power Systems PowerPact G0069981 Owner'S Manual preview
PowerPact G0069981
Brand: Generac Power Systems Pages: 36
ISOUND SOUNDBASE Manual preview
SOUNDBASE
Brand: ISOUND Pages: 3
Generac Power Systems GP Series 005938-0 Owner'S Manual preview
GP Series 005938-0
Brand: Generac Power Systems Pages: 56
TechniSat DIGITRADIO 307 Instruction Manual preview
DIGITRADIO 307
Brand: TechniSat Pages: 116
Vitek VT-3581 Manual Instruction preview
VT-3581
Brand: Vitek Pages: 6
SLIVE -U Manual preview
-U
Brand: SLIVE Pages: 2
ROBLON FL 500 XT B User Manual preview
FL 500 XT B
Brand: ROBLON Pages: 8
ROBLON FL 2002-2B User Manual preview
FL 2002-2B
Brand: ROBLON Pages: 8

Brands by name

Popular brands

Load more brands