manualshive.com logo in svg

E.F. Johnson Company 5100 ES, Operating Manual

The E.F. Johnson Company 5100 ES Service Manual is essential for anyone looking to maximize the potential of their device. This comprehensive manual covers every aspect of the product, providing detailed instructions and troubleshooting tips. Download this user manual for free from manualshive.com to unlock the full potential of your device.

Share
Download
background image

7-22 

ES Series Models II/III Portable Radio Operating Manual

Multi-Net Features

Acceptable

 - The RSSI of a site must exceed this level for it to be considered as a 

candidate for a new site by the site search procedure. 

Good

 - Not currently used.

Very Good -

 Not currently used.

7.13.5 Manual Site Search

When a Site Search option button or menu parameter is programmed, the following 
functions can be selected. Highlight the desired function using the Up/Down buttons and 
then select it by pressing the F2 button.

Site Display 

- Briefly press the Site Search option button or select “Site Display” in 

the menu mode. The current site alias and RSSI level are briefly displayed and this 
mode is exited.

Site Search

 - Press and hold the Site Search option button until a tone sounds or 

select “Site Search” in the menu mode. The current site alias and RSSI level are 
initially displayed. To display other sites, press the Up/Down buttons before time out 
occurs. The following operation then occurs: 

• If a new site is displayed and the F2 button is pressed or time-out occurs, that site 

becomes the new site if the dropout criteria indicates signal strength is adequate. 
Otherwise, searching for another site occurs. To lock the radio on a site, use the Site 
Lock function described in the next section. 

• If this mode is exited by pressing the F1 button or the current site is selected when time-

out occurs, no change in sites or site lock status occurs.

7.13.5.1

Site Lock

When the Site Lock option button or menu parameter is programmed, it toggles the Site 
Lock status of the current site. When this function locks the current site, the site alias is 
briefly displayed. If it unlocks the current site (site search is enabled), “SITE UNLCK” is 
briefly displayed. There is no indication that Site Lock is selected unless signal strength 
falls below the acceptable threshold and then the 

 icon is displayed (see Section 7.13.3). 

Site Lock always reverts to the disabled mode at power up. 

Summary of Contents for 5100 ES





















































































































































































































Reviews:

No comments

Related manuals for 5100 ES

Oakcastle IR100 Instruction Manual preview
IR100
Brand: Oakcastle Pages: 32
JB.lab K7 Operation Manual preview
K7
Brand: JB.lab Pages: 56
Navman VHF 7000 Operation Manual preview
VHF 7000
Brand: Navman Pages: 52
R&S SMBV100B Getting Started preview
SMBV100B
Brand: R&S Pages: 89
R&S AREG800A User Manual preview
AREG800A
Brand: R&S Pages: 411
R&S AREG800A Getting Started preview
AREG800A
Brand: R&S Pages: 64
Hytera MD652i Owner'S Manual preview
MD652i
Brand: Hytera Pages: 11
YAKUMO Yakumo DVD Travelle Instruction Manual preview
Yakumo DVD Travelle
Brand: YAKUMO Pages: 40
Blue-Links DAB-378AP User Manual preview
DAB-378AP
Brand: Blue-Links Pages: 10
Fusion STEREOACTIVE WS-SA150W Owner'S Manual preview
STEREOACTIVE WS-SA150W
Brand: Fusion Pages: 10
Noxon dRadio 100 Manual preview
dRadio 100
Brand: Noxon Pages: 20
Sylvania SDVD 7026 User Manual preview
SDVD 7026
Brand: Sylvania Pages: 12
ECO POWER CIPR-15Z NG/LP Installation And User Instructions Manual preview
CIPR-15Z NG/LP
Brand: ECO POWER Pages: 26
Champion 500560-UK Operator'S Manual preview
500560-UK
Brand: Champion Pages: 43
Hitachi PDV512 Instruction Manual preview
PDV512
Brand: Hitachi Pages: 25
Hitachi E40 Safety Instructions And Instruction Manual preview
E40
Brand: Hitachi Pages: 24
Hitachi PDV313 Instruction Manual preview
PDV313
Brand: Hitachi Pages: 25
Hitachi E24SB Safety Instructions And Instruction Manual preview
E24SB
Brand: Hitachi Pages: 40

Brands by name

Popular brands

Load more brands