manualshive.com logo in svg

E.F. Johnson Company 5100 ES, Operating Manual

The E.F. Johnson Company 5100 ES Service Manual is essential for anyone looking to maximize the potential of their device. This comprehensive manual covers every aspect of the product, providing detailed instructions and troubleshooting tips. Download this user manual for free from manualshive.com to unlock the full potential of your device.

Share
Download
background image

7-6 

ES Series Models II/III Portable Radio Operating Manual

Multi-Net Features

With all Unit/Directed Group calls, no special authorization is required. All that is needed 
is proper programming of the radios originating and receiving the call. Therefore, a Unit 
call can be made to any radio in the same site or some other site that is programmed to 
receive Auxiliary calls. The same applies to Directed Group calls except that the radio 
receiving the call does not need to be programmed for Unit calls, just the group ID being 
transmitted.

7.3

Caller Identification

The caller identification feature momentarily displays the four-digit unit (unique) ID code 
of the calling radio and/or the talkgroup ID code of the call when group calls are received. 
This feature is enabled or disabled radio wide by “PTT ID” and “TG on Rx” 
programming, and each can be displayed for 0.5-7.0 seconds. The normal group alias is 
then displayed continuously (see Section 7.9). 

Note

Call Indicator is currently not available. This transceiver currently does not support 
external data equipment in the Multi-Net mode. 

7.4

Dynamic Move to a New Zone / Channel

The Multi-Net dynamic move to a new system/group feature automatically changes the 
currently selected system/group of the radio. This can be done to ensure that all radios are 
on the correct system/group to receive and important message.

7.5

Dynamically Re-programmable Zone / Channel

A dynamically re-programmable zone/channel can be specified for each Multi-Net system. 
Any of the up to 16 Multi-Net channels programmable per Zone can be specified. With 
other Multi-Net radios, this function is restricted to group 11 of each system.

This channel can be programmed over-the-air by the system manager and also as a 
standard Multi-Net channel. This allows a Multi-Net channel to be set up over the air by 
the system manager. 

One use of this feature could be during an emergency situation to allow communication 
between users that normally could not talk to each other.

Summary of Contents for 5100 ES





















































































































































































































Reviews:

No comments

Related manuals for 5100 ES

VEF R-1 User Manual preview
R-1
Brand: VEF Pages: 3
oticon Aurora BTE Installation Manual preview
Aurora BTE
Brand: oticon Pages: 2
Axess SPBT1032 User Manual preview
SPBT1032
Brand: Axess Pages: 6
Kaide KK-9905 User Manual preview
KK-9905
Brand: Kaide Pages: 4
SOUNDMASTER RCD5000SW Manual preview
RCD5000SW
Brand: SOUNDMASTER Pages: 38
Telefunken TF-1592 Instruction Manual preview
TF-1592
Brand: Telefunken Pages: 13
Albrecht AE 4200 EU User Manual preview
AE 4200 EU
Brand: Albrecht Pages: 52
jotron TA-7650C Maintenance And Repair Manual preview
TA-7650C
Brand: jotron Pages: 26
Banner SureCross DX80ER M-H Series Quick Start Manual preview
SureCross DX80ER M-H Series
Brand: Banner Pages: 3
Denyo DCA-600SPK Instruction Manual preview
DCA-600SPK
Brand: Denyo Pages: 90
Schumacher SL1404 Owner'S Manual preview
SL1404
Brand: Schumacher Pages: 7
GPX BI100S User Manual preview
BI100S
Brand: GPX Pages: 12
Grundig RR 740 CD Service Manual preview
RR 740 CD
Brand: Grundig Pages: 40
JVCKENWOOD CR-M10DAB Operating Instructions Manual preview
CR-M10DAB
Brand: JVCKENWOOD Pages: 18
Vertex Standard VX-4200 Series Operating Manual preview
VX-4200 Series
Brand: Vertex Standard Pages: 44
Vertex Standard VXR-7000 Operating Manual preview
VXR-7000
Brand: Vertex Standard Pages: 44
Live IBC233B User Manual preview
IBC233B
Brand: Live Pages: 2
Philips FW55C/37 Specifications preview
FW55C/37
Brand: Philips Pages: 2

Brands by name

Popular brands

Load more brands