manualshive.com logo in svg

E.F. Johnson Company 5100 ES, Operating Manual

The E.F. Johnson Company 5100 ES Service Manual is essential for anyone looking to maximize the potential of their device. This comprehensive manual covers every aspect of the product, providing detailed instructions and troubleshooting tips. Download this user manual for free from manualshive.com to unlock the full potential of your device.

Share
Download
background image

1-2 

ES Series Models II/III Portable Radio Operating Manual

Features

• Large graphic display with backlight

• 16-position channel select switch

• Three-position rotary option switch

• Up to nine (limited keypad) or 21 (DTMF keypad) programmable option keys/buttons

• Each option key/button programmable with a different function for each operating 

mode (Conventional, SMARTNET/SmartZone, Trunked P25) 

• Menu mode 

• AES 256-bit FIPS 140-2 approved encryption available on P25/digital channels. 

(Encryption is currently not available on Multi-Net channels.)

Note

The 51SL ES Series radios are dual encryption. Either DES or AES encryption is available 
(not both). Single key DES is standard when P25 is ordered. 

 

 

Either DES encryption or AES encryption is optional for the 51FIRE ES Series and may be 
purchased from EFJohnson Technologies.

• DES 64-bit encryption available on analog channels, DES-OFB on digital channels (see 

Section 11). (Encryption is currently not available on Multi-Net channels.)

• Emergency calls for high priority system access

• Priority (standard) and Radio Wide scan modes with user programmable scan lists

• User selectable high and low power output

• Surveillance mode

• Time-out timer

• Keypad lock to prevent accidental key presses

• Power up password to prevent unauthorized use.

• Programmable and user adjustable tone volume

• Programmable minimum volume level

• Soft power down to prevent accidental power off

• Operates on both wide and narrow band channels

• Adjust Contrast values of LCD display

• Over the Air Programming (OTAP) option enables you to program radios without 

connecting them to a computer

• Easy radio programming and feature updating for portable and mobile radios

Note

The availability of many features is controlled by field programming and by the options 
ordered. See the EFJohnson Technologies product description and the following sections 
in this manual for additional information.

Summary of Contents for 5100 ES





















































































































































































































Reviews:

No comments

Related manuals for 5100 ES

Sangean LUNCHBOX LB-100 Brochure preview
LUNCHBOX LB-100
Brand: Sangean Pages: 1
Wacker Neuson G 150 Operator'S Manual preview
G 150
Brand: Wacker Neuson Pages: 74
Sangean ProTravel PT-50 Operating Instructions Manual preview
ProTravel PT-50
Brand: Sangean Pages: 56
Generac Power Systems IX1600 Specification preview
IX1600
Brand: Generac Power Systems Pages: 2
Ubiquiti airFiber AF-24 Quick Start Manual preview
airFiber AF-24
Brand: Ubiquiti Pages: 36
Richter RR25 User Manual preview
RR25
Brand: Richter Pages: 12
PortaCo G-18S10-54-W Operation Manual preview
G-18S10-54-W
Brand: PortaCo Pages: 28
Generac Power Systems 1658-0 User Manual preview
1658-0
Brand: Generac Power Systems Pages: 16
Comtex CS-1000DX User Manual preview
CS-1000DX
Brand: Comtex Pages: 24
Ranger Communications TR-127GK/DX Service Manual preview
TR-127GK/DX
Brand: Ranger Communications Pages: 29
Fermont MEP-831A Manual preview
MEP-831A
Brand: Fermont Pages: 33
LoopTone DS-R08 Instruction Manual preview
DS-R08
Brand: LoopTone Pages: 5
Coleman Powermate PM0523202.17 User Manual preview
Powermate PM0523202.17
Brand: Coleman Pages: 8
DeWalt DCR018 Instruction Manual preview
DCR018
Brand: DeWalt Pages: 48
DeWalt DC013-XE Instruction Manual preview
DC013-XE
Brand: DeWalt Pages: 16
DeWalt DC010 Manual preview
DC010
Brand: DeWalt Pages: 60
Motorola LB1 (29.6 - 36.0MHz) Service Information preview
LB1 (29.6 - 36.0MHz)
Brand: Motorola Pages: 26
Motorola MaxTrack 100 Service Manual preview
MaxTrack 100
Brand: Motorola Pages: 45

Brands by name

Popular brands

Load more brands