manualshive.com logo in svg

E.F. Johnson Company 5100 ES, Operating Manual

The E.F. Johnson Company 5100 ES Service Manual is essential for anyone looking to maximize the potential of their device. This comprehensive manual covers every aspect of the product, providing detailed instructions and troubleshooting tips. Download this user manual for free from manualshive.com to unlock the full potential of your device.

Share
Download
background image

ES Series Models II/III Portable Radio Operating Manual

 11-7

Secure Communication (Encryption)

11.3.2 Analog Receive Mode Options

The following receive options can be programmed with conventional operation. With 
SMARTNET/SmartZone and P25 Trunked operation, encrypted calls are received if the 
proper key is programmed.

No Autodetect

 - Only signals coded like the transmit signals are received.

Proper Key Autodetect 

- (Analog Channels) When this feature is disabled and a 

message is received with the wrong key, the audio unmutes and garbled (encrypted) 
audio is heard. However, if this occurs with this feature enabled, the audio remains 
muted.

11.3.3 Talkgroup Encryption Override

Conventional digital (P25), Smartnet/Smartzone and P25 Trunking encryption strapping is 
programmed on a “per talkgroup” basis. However conventional digital and P25 trunking 
talkgroup encryption strapping can be overridden on a “per channel” basis.Therefore, if 
desired on Conventional Digital and P25 Trunking channels, encryption can be 
programmed differently for each channel. Conventional analog channel encryption is 
always programmed on a per-channel basis.

11.4 Over-The-Air Rekeying (OTAR)

Over-The Air-Rekeying (OTAR) is the process of sending encryption keys and related key 
management messages over-the-air to specific radios. The advantage of OTAR is that it 
allows these keys to be quickly and conveniently updated when necessary. It is no longer 
necessary to periodically travel to the radio location or bring the radio into a maintenance 
facility to load new keys.

The actual OTAR rekeying functions are performed by a Key Management Facility 
(KMF) that sends Key Management Messages (KMM) to the radios. These messages are 
themselves encrypted using an encryption key. Radios must be OTAR-compatible and 
programmed for OTAR for this type of rekeying to occur.

Note

The RSI is enabled in the KMF and must be assigned to the radio by programming.

OTAR is available only on P25 conventional and trunked channels, and only to program 
DES-OFB and AES keys. It is not used on SMARTNET/SmartZone channels or to load 
DES keys.

Summary of Contents for 5100 ES





















































































































































































































Reviews:

No comments

Related manuals for 5100 ES

i-box Melody User Manual preview
Melody
Brand: i-box Pages: 56
Ramsey Electronics SR-1 Instruction Manual preview
SR-1
Brand: Ramsey Electronics Pages: 22
Teac LT-1 Service Manual preview
LT-1
Brand: Teac Pages: 28
Ryobi RY905500 Operator'S Manual preview
RY905500
Brand: Ryobi Pages: 68
Neilsen CT4539 Original Instructions Manual preview
CT4539
Brand: Neilsen Pages: 40
C. Crane CC Witness Instruction Manual preview
CC Witness
Brand: C. Crane Pages: 36
Fusion STEREOACTIVE WS-SA150W Owner'S Manual preview
STEREOACTIVE WS-SA150W
Brand: Fusion Pages: 10
SOUNDMASTER DAB650 Manual preview
DAB650
Brand: SOUNDMASTER Pages: 11
Winco ULPSS12H2E Installation And Operator'S Manual preview
ULPSS12H2E
Brand: Winco Pages: 13
Cirro Strata CS6 Instruction Manual preview
Strata CS6
Brand: Cirro Pages: 8
Muse M-335 TV User Manual preview
M-335 TV
Brand: Muse Pages: 14
Ericsson MPI-II LBI-38558B Maintenance Manual preview
MPI-II LBI-38558B
Brand: Ericsson Pages: 14
KAM KWD220 HH Instruction Manual preview
KWD220 HH
Brand: KAM Pages: 6
Keysight Technologies M9383A PXIe Programming Manual preview
M9383A PXIe
Brand: Keysight Technologies Pages: 36
König Electronic HAV-SR20 Instructions Manual preview
HAV-SR20
Brand: König Electronic Pages: 8
Guardian 4702 Repair Manual preview
4702
Brand: Guardian Pages: 92
DANA Brevini CMI Series Assembly Instructions Manual preview
Brevini CMI Series
Brand: DANA Pages: 8
Haier LCD258 Instruction Manual preview
LCD258
Brand: Haier Pages: 2

Brands by name

Popular brands

Load more brands