manualshive.com logo in svg

E.F. Johnson Company 5100 ES, Operating Manual

The E.F. Johnson Company 5100 ES Service Manual is essential for anyone looking to maximize the potential of their device. This comprehensive manual covers every aspect of the product, providing detailed instructions and troubleshooting tips. Download this user manual for free from manualshive.com to unlock the full potential of your device.

Share
Download
background image

5-36 

ES Series Models II/III Portable Radio Operating Manual

Conventional Mode Features

If “R to R” is enabled (paragraph 5.16.1), an acknowledgement message is not received. 
Instead, the display will show “Msg Sent”.

5.16.3 Receiving a Text Message

When a text message is received, a short alternating tone is sounded and the display 
flashes “Text Msg”.

To view the message, press the assigned text message function button. The sender’s Unit 
ID (or alias, if programmed) will be displayed for approximately one second. Following 
this, the text of the message is shown.

If the message is 10 characters or less in length, the text will remain stationary on the 
display.

If the message is longer than 10 characters, the text will scroll across the display.

• To pause scrolling, press the F2 button.

• If desired, adjust the message position using the up/down rocker

• To resume scrolling, press the F2 button again

Note

The message displayed is the message most recently received. To view messages received 
earlier, refer to paragraph 5.16.4.

5.16.3.1

Replying to a Received Text Message

To send a reply to a received text message:

1

While viewing the received message, press the F4 button. The unit enters the text 
message sending mode of paragraph 5.16.2.

2

Send the text of the reply according to the instructions of paragraph 5.16.2.

5.16.4 Viewing Previously Received Messages

To view previously received messages:

1

Press and hold the text message button, or select the text message menu item, and select 
“View Msg”. The display will show “Message 1”, which is the most recent message 
received.

2

Use the up/down rocker to move through the list to the desired message.

Summary of Contents for 5100 ES





















































































































































































































Reviews:

No comments

Related manuals for 5100 ES

Makita DMR112 Original Instructions Manual preview
DMR112
Brand: Makita Pages: 13
4RF Aprisa SR+ Quick Start Manual preview
Aprisa SR+
Brand: 4RF Pages: 2
Zgonc yellow PROFILINE YPL 6000-D Translation Of The Original Instructions preview
yellow PROFILINE YPL 6000-D
Brand: Zgonc Pages: 25
Vapor 3000 A Plus Instructions For Use Manual preview
3000 A Plus
Brand: Vapor Pages: 114
Hytera MD62X Manual preview
MD62X
Brand: Hytera Pages: 24
MAJORITY Madingley Hall CB23-DAB-WHT/BLK User Manual preview
Madingley Hall CB23-DAB-WHT/BLK
Brand: MAJORITY Pages: 20
RIP TUNES RACR-400 User Manual preview
RACR-400
Brand: RIP TUNES Pages: 42
Albrecht AE 6190 HD -X Operating Manual preview
AE 6190 HD -X
Brand: Albrecht Pages: 16
Pure Digital SONUS-1 SONUS-1XT Owner'S Manual preview
SONUS-1 SONUS-1XT
Brand: Pure Digital Pages: 20
Tesla TI3500 GPU-24 Manual preview
TI3500 GPU-24
Brand: Tesla Pages: 53
EFOY ProEnergyBox 4060P User Manual preview
ProEnergyBox 4060P
Brand: EFOY Pages: 40
GE 040324 Operator'S Manual preview
040324
Brand: GE Pages: 88
ASCO POWER TECHNOLOGIES Series 300 Operator'S Manual preview
Series 300
Brand: ASCO POWER TECHNOLOGIES Pages: 18
Vertex Standard VX-2500U Service Manual preview
VX-2500U
Brand: Vertex Standard Pages: 79
Craftsman CMXGGAS030731 Operator'S Manual preview
CMXGGAS030731
Brand: Craftsman Pages: 40
Craftsman 919.679580 Owner'S Manual preview
919.679580
Brand: Craftsman Pages: 36
Craftsman 919.679501 Owner'S Manual preview
919.679501
Brand: Craftsman Pages: 28
Craftsman CMXGGAS030733 Operator'S Manual preview
CMXGGAS030733
Brand: Craftsman Pages: 40

Brands by name

Popular brands

Load more brands