manualshive.com logo in svg

E.F. Johnson Company 5100 ES, Operating Manual

The E.F. Johnson Company 5100 ES Service Manual is essential for anyone looking to maximize the potential of their device. This comprehensive manual covers every aspect of the product, providing detailed instructions and troubleshooting tips. Download this user manual for free from manualshive.com to unlock the full potential of your device.

Share
Download
background image

7-8 

ES Series Models II/III Portable Radio Operating Manual

Multi-Net Features

Automatic Transmit - 

This mode is typically used in radio systems that do have a 

centralized dispatch console that can send a response that acknowledges automatic 
transmissions. When the Emergency button is activated with Automatic Transmit 
programmed, the Emergency Zone and Channel are selected and scanning is disabled. The 
transceiver begins automatically transmitting the Emergency Alert call on the 
programmed emergency zone/channel every 10 seconds using access priority 1. User PTT 
events are processed normally during automatic transmit. The auto transmit timer is reset 
at release of PTT.

When the dispatcher receives an emergency call, the radio’s unique ID and other 
information is displayed on the console. The dispatcher then responds to the call which 
dedicates a channel to the emergency call. When this call is detected by the transceiver, it 
halts automatic transmissions. All further transmit attempts are made on the dedicated 
channel until the emergency call is ended by the dispatcher sending an acknowledge 
message. While emergency is active Zone and Channel selection and scanning remain 
disabled. After dispatcher reply, any further subscriber transmissions occur at the access 
priority programmed for the Group selected by the emergency button. 

Note

While the user may terminate the emergency mode from the radio (emergency button press 
and hold or by cycling power), only the dispatcher action will terminate the emergency 
condition and release the repeater for others to use.

7.7

Encryption

Voice encryption is currently not available on Multi-Net channels. However, it is available 
with the other operating modes.

7.8

Group Scanning

Each MultiNet system can be programmed with group scan lists that can include up to 32 
channels (groups) linked to that system (see limitations in Section 7.8.2). The Multi-Net 
group scan feature of this radio monitors the Multi-Net groups in the scan list of the 
selected system (home channel).

Note

To scan other home channels (systems) of single or multiple sites, use radio wide scanning 
(see Section 4.12.2). 

Summary of Contents for 5100 ES





















































































































































































































Reviews:

No comments

Related manuals for 5100 ES

Garmin GDL 69 Instructions Manual preview
GDL 69
Brand: Garmin Pages: 8
R&S SMA100B Getting Started preview
SMA100B
Brand: R&S Pages: 59
BANDELIN SONOREX TECHNIK TG Series Assembly Instructions Manual preview
SONOREX TECHNIK TG Series
Brand: BANDELIN Pages: 25
Hama DR5BT Manual preview
DR5BT
Brand: Hama Pages: 14
All-Power APG3090 Owner'S Manual preview
APG3090
Brand: All-Power Pages: 33
Hyundai DHY12000SE(-3) User Manual preview
DHY12000SE(-3)
Brand: Hyundai Pages: 24
Margaritaville MVABB1GW Instruction Manual preview
MVABB1GW
Brand: Margaritaville Pages: 2
nedis SPBB305BK Quick Start Manual preview
SPBB305BK
Brand: nedis Pages: 28
Racal Instruments AN/TRC-207 Operation And Maintenance Instructions preview
AN/TRC-207
Brand: Racal Instruments Pages: 102
JRC NSVS851 Manual preview
NSVS851
Brand: JRC Pages: 4
TRADEpower MCOG703A Owner'S Manual preview
MCOG703A
Brand: TRADEpower Pages: 12
Johnson & Johnson ETHICON ENDO-SURGERY HARMONIC 300 Service Manual preview
ETHICON ENDO-SURGERY HARMONIC 300
Brand: Johnson & Johnson Pages: 80
NextBase SDV47-A Operating Instructions Manual preview
SDV47-A
Brand: NextBase Pages: 45
Xoro HSD 7560 Operation Manual preview
HSD 7560
Brand: Xoro Pages: 146
Briggs & Stratton 1934 Owner'S Manual preview
1934
Brand: Briggs & Stratton Pages: 56
Powermate PM0496504.18 Product Manual preview
PM0496504.18
Brand: Powermate Pages: 16
Feider Machines FG800 Original Instructions Manual preview
FG800
Brand: Feider Machines Pages: 80
Curtis DVD8017 User Manual preview
DVD8017
Brand: Curtis Pages: 28

Brands by name

Popular brands

Load more brands