manualshive.com logo in svg

E.F. Johnson Company 5100 ES, Operating Manual

The E.F. Johnson Company 5100 ES Service Manual is essential for anyone looking to maximize the potential of their device. This comprehensive manual covers every aspect of the product, providing detailed instructions and troubleshooting tips. Download this user manual for free from manualshive.com to unlock the full potential of your device.

Share
Download
background image

ES Series Models II/III Portable Radio Operating Manual

 5-3

Conventional Mode Features

The Normal/Selective function disables Call Guard squelch and P25 group ID detect but 
not scanning and P25 NAC detect (see Section 5.4.6).

5.3

Busy Channel Lockout

The Busy Channel Lockout feature (also called Transmit Disable on Busy) automatically 
disables the transmitter if the channel is busy when the PTT switch is pressed. When the 
transmitter is disabled by this feature, “Busy” is displayed, a busy tone sounds, and the 
transmitter is disabled.

The Busy Channel Lockout feature can be programmed to operate as follows. Each 
conventional channel can be programmed differently.

“Off” - Busy channel lockout is disabled and the transmitter keys even if the channel is 
busy.

“Noise” - If a carrier is detected on the channel, the transmitter is disabled when the 
PTT switch is pressed.

“Tone (NAC)” - If an incorrect Call Guard (CTCSS/DCS) or NAC code (see Section 
5.14) is detected, the transmitter is disabled when the PTT switch is pressed. An 
incorrect code is any code other than the one programmed for the current channel.

“Status” - Transmission is disabled if the repeater inbound channel busy status symbol 
is detected.

“Talkgroup” - Prevents transmission during calls with a different NAC or talkgroup. 
Transmission is allowed during data or short terminators with the correct NAC. 
Applicable to Conventional Digital channels.

If Busy Channel Override is permitted by programming, it is possible to transmit even 
when the transmitter is disabled by this feature. Release the PTT switch and then quickly 
press it again (within one second).

5.4

Call Guard Squelch

Tone or digital Call Guard squelch (also called CTCSS/DCS signaling) can be 
programmed on each conventional analog transmit and receive channel in any order 
desired. The reverse burst and turn-off code are always transmitted and also detected on 
channels programmed with Call Guard squelch.

Summary of Contents for 5100 ES





















































































































































































































Reviews:

No comments

Related manuals for 5100 ES

Shindaiwa DGA12DM Owner'S And Operator'S Manual preview
DGA12DM
Brand: Shindaiwa Pages: 52
Rato R2000IS Maintenance Manual preview
R2000IS
Brand: Rato Pages: 64
GoVideo DP5040 Quick Reference Manual preview
DP5040
Brand: GoVideo Pages: 2
Ericsson MGM 450 Maintenance Manual preview
MGM 450
Brand: Ericsson Pages: 70
Grundig DVD-P 7644 Instruction Manual preview
DVD-P 7644
Brand: Grundig Pages: 34
GPX BC112 User Manual preview
BC112
Brand: GPX Pages: 2
Radio Shack 21-1840 Owner'S Manual preview
21-1840
Brand: Radio Shack Pages: 16
Goodmans GDBTSPK22BLK Getting Started preview
GDBTSPK22BLK
Brand: Goodmans Pages: 2
perfect pro Solid Digital Instruction Manual preview
Solid Digital
Brand: perfect pro Pages: 32
Raritan Satellite Radio User Manual preview
Satellite Radio
Brand: Raritan Pages: 2
Baldor IDLC Generator Installation Manual preview
IDLC Generator
Brand: Baldor Pages: 1
QUAD ESL 2805 Brochure & Specs preview
ESL 2805
Brand: QUAD Pages: 20
Thulos TH-OZG005 Instruction Manual preview
TH-OZG005
Brand: Thulos Pages: 5
GENTRON GG3500D Owner'S Manual preview
GG3500D
Brand: GENTRON Pages: 33
Powermate PM0133250 Operator'S Manual preview
PM0133250
Brand: Powermate Pages: 72
OPW M00-20-6020 User Manual preview
M00-20-6020
Brand: OPW Pages: 22
Clas Ohlson HP-51DFJ Instruction Manual preview
HP-51DFJ
Brand: Clas Ohlson Pages: 28
U.S. Products OASIS-PLUS Information & Operating Instructions preview
OASIS-PLUS
Brand: U.S. Products Pages: 8

Brands by name

Popular brands

Load more brands