36
GBK52983 iPortal2 User Manual Issue 3
iPortal – Dashboard
5.5.
System messages
Unable to Connect
You need to set up your Bluetooth® connection: cycle the power on
your chair, and allow 30 seconds for re-connection. If the message
persists check that the iOS device is paired correctly with the iPortal2
(see Step 2 - pair the iPortal2 and the iOS device, in the section Setting
up the iPortal2 with your iOS device).
No Drive Info Available
Your wheelchair battery may be charging. If you see this message
momentarily, you can ignore it. If the message persists, contact an
approved dealer.
Can't Drive in this Mode
Your Remote unit is in a mode that does not permit driving. On your
Remote unit, select a drive profile. This screen will show when your
wheelchair is charging.
OONAPU Detected
OONAPU means Out Of Neutral At Power Up. Your Remote is not in
the neutral position, and you are trying to power up your system. This
is a safety feature. Place your Remote in the neutral position, and try
again.
Locked
Your wheelchair control system is locked. To unlock it, follow the
normal procedure for your system.
5.6.
Status icons
In Drive and Seating mode, three icons are visible at the top of the Dashboard
screen. If inactive, the icons are greyed out. If active, they are yellow. Also, a number
indicating a fault code appears if a fault is active on the wheelchair control system.
Lights are on
(if fitted)
Drive inhibit is in force
Active fault code
Summary of Contents for iPortal2
Page 72: ......