62
GBK52983 iPortal2 User Manual Issue 3
Appendices
1.
Using the keyboard
•
Navigate to the keyboard by moving the joystick to the right for less than one
second (Right-Short); the screen cursor will be on the ‘Q’ key
To add text with the keyboard, simply navigate (left or right) to each character key,
and select it with Up-Short. To write “Pick up bread”, and with the screen cursor at the
‘Q’ key:
•
Navigate to the ‘P’ key (9 x Right-Short)
•
Select ‘P’ (Up-Short)
•
Navigate to the ‘I’ key (2 x Left-Short)
•
Select ‘I’ (Up-Short)
•
Navigate to the ‘c’ key (15 x Right-Short)
•
Select ‘c’ (Up-Short)
•
Navigate to the ‘k’ key (5 x Left-Short)
•
Select ‘k’ (Up-Short)
……and so on until the note is complete (Space,u,p,Space,b,r,e,a,d).
At this point, the screen cursor will be on the letter ‘d’ (last letter of bread). To
complete the note, move the screen cursor to the ‘Done’ button by sending the
screen cursor to the top of the page with the Page Top command (Left-Long).
•
Move the joystick left for two-three seconds (Left-Long) (Page Top)
•
Navigate to the ‘Done’ button (2 x Right-Short)
•
Select ‘Done’ (Up-Short)
That completes the note.
2.
Using Morse code
To use the Morse code text input, change from Navigation mode to Text mode.
•
Hold the joystick up for longer than two seconds (Up-Long)(Text mode)
To add the text, follow the table below:
Action
Code
Character/Operation
Left-Short
Right-Short
Right-Short
Left-Short
● ▬▬ ●
p
Up-Sort
Select ‘p’
Left-Short
Left-Short
● ●
I
Up-Short
Select ‘I’
Right-Short
Left-Short
Right-Short
Left-Short
▬ ●▬ ●
C
Summary of Contents for iPortal2
Page 72: ......
