Dynamic iPortal2 User Manual Download Page 16

Page: 16 / 72

GBK52983 iPortal2 User Manual Issue 3

iPortal

4.3.3.2.

To download iPortal Dashboard using your computer:

Start your Internet connection and start iTunes.

•

Browse to the iTunes Store, and then browse to the App Store

•

Search for iPortal Dashboard and select iPortal Dashboard from the search

results

•

Click INSTALL

If you use your computer to download the iPortal Dashboard application, the

application will be installed automatically on your iOS device next time you sync.

4.3.3.3.

Firmware upgrades

The Dashboard application automatically checks for

newer versions of firmware for the iPortal2 module. If

the firmware is out-of-date, the Dashboard

application will ask you if you want to upgrade it

(see image right). It is strongly recommended to

perform the upgrade when asked.
If you do not want to upgrade the firmware

straightaway, then press the Later button and the

Dashboard application will start normally - you will

be asked to upgrade again after 24 hours has

passed.

If the time is convenient for you, press the Upgrade Now button.

CAUTION

DO NOT CYCLE THE POWER during the upgrade process as an interruption could

lead to the iPortal2 becoming inoperable.

Summary of Contents for iPortal2









































































Search results

Summary of Contents for iPortal2

Reviews:

Related manuals for iPortal2

Brands by name

Popular brands

Dynamic iPortal2, User Manual

Search results

Summary of Contents for iPortal2

Reviews:

Related manuals for iPortal2

Brands by name

Popular brands