Embedded Solutions
Page 2 of 50
PMC-BiSerial-III HW2
Bi-Directional Serial Data Interface
PMC Module
Dynamic Engineering
150 DuBois, Suite 3
Santa Cruz, CA 95060
(831) 457-8891
FAX: (831) 457-4793
This document contains information of
proprietary interest to Dynamic Engineering. It
has been supplied in confidence and the
recipient, by accepting this material, agrees that
the subject matter will not be copied or
reproduced, in whole or in part, nor its contents
revealed in any manner or to any person except
to meet the purpose for which it was delivered.
Dynamic Engineering has made every effort to
ensure that this manual is accurate and
complete. Still, the company reserves the right to
make improvements or changes in the product
described in this document at any time and
without notice. Furthermore, Dynamic
Engineering assumes no liability arising out of
the application or use of the device described
herein.
The electronic equipment described herein
generates, uses, and can radiate radio frequency
energy. Operation of this equipment in a
residential area is likely to cause radio
interference, in which case the user, at his own
expense, will be required to take whatever
measures may be required to correct the
interference.
Dynamic Engineering’s products are not
authorized for use as critical components in life
support devices or systems without the express
written approval of the president of Dynamic
Engineering.
This product has been designed to operate with
PMC Module carriers and compatible user-
provided equipment. Connection of incompatible
hardware is likely to cause serious damage.
©2005-2007 by Dynamic Engineering.
Other trademarks and registered trademarks are
owned by their respective manufactures.
Revised September 25, 2007.
