Settings
27
© 2019 DynaGen Technologies Inc
TOUGH Series Manual
4
Settings
The following section relates to settings that can be changed to alter the way the controller performs its functions. Read and
review these sections carefully to ensure your settings are set correctly for your engine.
4.1
Operator Setup
The following settings are used to change the way the user interacts with the controller. They are not password protected and
can be changed by anyone from the front panel.
Name
Range
Default
Setting
Description
Lamp Test
-----
-----
Performs a lamp test on the LEDs when selected.
Display > LCD
Reverse
-----
-----
Reverses the white and black pixels when selected.
Display > LCD
Contrast
5 ~ 95%
50%
Changes the contrast of the LCD.
Display > Page
Scroll
1 ~ 10 seconds
5s
Amount of time between each auto scroll of the parameter pages.
Display > Message
Pop-Up
1 ~ 10 seconds
2s
Amount of time each message is displayed on the screen before
displaying next message in the buffer.
Display >
DPF/DEF Display
Time
0 ~ 10 seconds
2s
See DPF/DEF aftertreatment in the J1939 Reference Manual for
more information.
Display > LCD
Backlight Timeout
10 ~ 600 seconds
600s
Amount of time the LCD Backlight stays on after button activity
stops.
Date / Time > Date
Change
1 ~ 31 days
1 ~ 12 months
2000 ~ 2099
years
-----
Sets the date.
Date / Time > Time
Change
0 ~ 23 hours
0 ~ 59 minutes
0 ~ 59 seconds
-----
Sets the time.
Date / Time >
Daylight Savings
Enable or Disable
Enable
Turns Daylight Savings Time on or off. This applies to North
America only. Disable for other locations.
Units >
Temperature Unit
Fahrenheit or
Celcius
Fahrenheit
Selects the temperature display format.
Units > Pressure
Unit
PSI or kPa
PSI
Selects the oil pressure display format.
Run from OFF >
RUN from OFF
Enable ~ Disable
Enable
When enabled, allows a user to start the engine using the run
button while in the OFF mode. When disabled the controller must
be placed in AUTO mode before the run button can start the engine.
Summary of Contents for Tough Series
