DW -Pro 9200 Series, Operation Instructions Manual

Page: 9 / 114

When shipping the DW-Pro unit, the original shipping carton
packing materials come in handy. For maximum protection, repack the
unit as it was originally packed at the factory.
Do not use volatile liquids, such as insect spray, near the DW-
Pro unit. Do not leave rubber or plastic products in contact with the DW-
Pro unit for long periods of time. They will leave marks on the finish.
The top and rear panels of the DW-Pro unit may become warm
after long periods of use. This is not a malfunction.
Place the DW-Pro unit on a level surface. Do not use it on a shaky or
unstable surface such as a wobbling table or inclined stand.
W hen you place this DW-Pro unit next to a TV, radio, or VCR, the
playback picture may become poor and the sound may be distorted. In
this case, place the DW-Pro unit away from the TV, radio, or VCR.
Use a soft dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent solution,
wring well and wipe. Use a dry cloth to wipe it dry.
Do not use any type of solvent, such as thinner and benzene, as they
may damage the surface of the DW-Pro unit.
If you use a chemical saturated cloth to clean the unit, follow that
product ’ s instructions.
This DW-Pro unit is designed to last for long periods of time. To keep
your DW-Pro unit always operational we recommend regular inspection
maintenance (cleaning parts or replacement). For details contact your
nearest dealer.
Moisture condensation damages the
DW-Pro unit. Please read the following
carefully.
Moisture condensation occurs during the
following cases.
When you bring the DW-Pro unit
directly from a cold place to a warm
place.
When you use the DW-Pro unit in
a room where you just turned on the
heater, or a place where the cold wind
from the air conditioner directly hits the
unit.
In the summer, when you use the
DW-Pro unit in a hot and humid place
just after you move the unit from an air
conditioned room.
When you use the DW-Pro unit in
a humid place.
Do not use the DW-Pro unit when
moisture condensation may occur.
If you use the DW-Pro unit in such a
situation, it may damage discs and
internal parts. Remove any CD discs,
connect the power cord of the DW-Pro
unit to the wall outlet, turn on the DW-Pro
unit, and leave it for two to three hours.
After two to three hours, the DW-Pro unit
will have warmed up and evaporated any
moisture. Keep the DW-Pro unit
connected top the wall and moisture will
seldom occur.