DW -Pro 9200 Series, Operation Instructions Manual

Page: 84 / 114

[On/Off Time]
• You can select the time to activate Motion
Tracking function.
• The default value is 00:00~24:00.
(continue for 24 hours)
• The camera works in Pan/Tilt mode out of the
configured time.
[TILT Angle]
• Adjust this value when the selection box is higher
or lower than the position you clicked.
13
14
15
16
17
18
19
[Disable PTZ mode]
• Disables PTZ mode from the Motion Tracking
camera.
• If you don’t select this, both Motion Tracking
and PTZ will be used.
[PAN/TILT angle]
• Displays the current image from the motion
tracking camera.
• You need to configure the Pan and Tilt angle in
order to locate the selection box to the selected
position.
[PAN Angle]
• Adjust this value when the selection box is out
of the position in left and right you selected.
[Sensitivity]
• If you make this value higher, the camera movement
will be more sensible and vice versa.
• You need to adjust this value properly depending on
the location since Motion Tracking might move even
by little light if it’s too sensitive.
[Camera Flip]
• Use this function when the dome camera is flipped.
• When the dome camera is installed from flipped
position, it will work in reverse. Therefore, it might
look broken. In order to prevent that kind of problem
this might be used.
13
14
15
16
17
18
19