DW -Pro 9200 Series, Operation Instructions Manual

Page: 101 / 114

‰Q
‰Q ‰Q
‰Q
[PC setup for use of Microphone from advanced mode]
• When the audio input through microphone is weak even in the maximized volume you can amplify the
audio input by adjusting as follows.
• ‘Advanced’ button will appear under applicable columns when you select ‘Option -> Advanced Controls
2
• You can go to ‘Advanced Controls for Microphone’ by clicking ‘Advanced’ on ‘Mic’ taps in
‘Volume Controls’.
• Please adjust the options to fit into your system and check the sound output
from ‘Other Controls’.
ƒ
'!) 9*
&
• Click on ‘Mute’ which is circled on the left picture, if you do not want any voice
output from a speaker that was inputted to the microphone but record the voice
only or if you just want the output of searched voice from the speaker only when
installing a microphone.
• When the system doesn’t support ‘Microphone Boost’ function, ‘Advanced’ button
may not appear. In that case you can solve it by using a more sensitive amplified
microphone.
• Sound card must be installed properly to use voice recording function.