DW -Pro 9200 Series, Operation Instructions Manual

Page: 52 / 114

L
L L
L
Control Setup
Control Setup
1
2
3
4
5
[Use]
• Check the output number you want to use.
[Controller name]
• Enter controller name to use.
• Can be extended up to 14 characters in English.
Ex) Siren, lamp, alarming lamp and etc…
[Automatic ON/OFF]
• You can enable control output only within desired
time by choosing this function.
• It only works within desired time and the default
time is from 00:00 to 24:00.
[Linked Sensor]
• If you want the controller to work automatically,
enter the sensor to connect to it.
Ex) When operating sensor number 2 while sensor
number 1 is operating, input “1” under related
control output list.
[Working time]
• Enter the working time of control output in second.
(The maximum is 255 sec and default is set to 0 sec).
1 2 3 4 5