DW -Pro 9200 Series, Operation Instructions Manual

Page: 51 / 114

External Sensor Setup
External Sensor Setup
1
2
3
[Use]
• Click the check box so the external sensor quantity and input sensors are the same.
[NC/NO]
• Choose the sensor type.
• Clicking will change to [NC]<-> [NO]
([NC] is set to default)
• NC : Normal Close Type Sensor
• NO : Normal Open Type Sensor
[Choosing Beep Sound]
• Beep sound will occur when a signal is detected within selected time. Speaker that is located
inside the system will let you know the situation on site by the sound.
• Click on [Choose Beep Sound] if you wish (Beep sound occurs only within the time you set).
• Beep sound will not be operated when a corresponding number of recording schedule is set to
“Continuous Recording”.
[Sensor and Recording Time]
• When a sensor is activated and give out the signal, it will set the recording time of related
camera’s image.
• Recording time of related camera’s image is up to 60 seconds.
L
L L
L