DW -Pro 9200 Series, Operation Instructions Manual

Page: 50 / 114

‰
‰ ‰
‰
1.3 Hardware setup
2
3
[P/T]
•
Check here if the camera is PAN/TILT type.
• Selected camera has ‘Pan/Tilt’ on top of the screen.
4
6
5
[Recording with Motion Detected channel]
• When a camera detects any movement, system
records it’s linked channel as well.
From “Recording Schedule” tap, record setting
must be under Motion Detection mode for inputted
specific camera number. If it is set on ‘Continuous
recording’, this function is not activated.
Input camera number of related camera that will
detect and record related motion at the same time.
Ex) When camera number 1 and number 2
capture any motion and you also want camera
number 3 to record it as well, just input “1,2” to
“Related Motion” blank space under camera
number 3.
[Use]
•Check on the camera to use.
1
[Name]
• Type the camera title here,
Ex) Parking lot, Main Entrance, etc.
• You can type upto14 characters.
[Sensor]
• DW9200 has a motion detection function.
You can attach external sensors from 8 to 16.
• If the related external sensor starts working,
connected camera starts recording.
• Input the sensor number you wish to use (Sensor
number that’s related with each camera).
• If there are a few cameras, you can separate by
comma.
• This is not required on motion detection mode.
Ex) If you want to store an image from number 1
camera while number 2 and number 3’s external
sensor is working, input “2,3” on number 1
camera’s “Link sensor” list.
L
L L
L
[Type]
• Model type of Rx-receiver and Speed Dome
Camera that are compatible with DW9200 system is
stored in the scroll box. Select the model that is
identical to the one you are using.
Camera Setup
Camera Setup